ES USER’S GUIDE GUÍA DEL USUARIO AP45ES1B
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Precautions Congratulations on your selection of the CASIO Digital Piano. This digital piano is a sophisticated musical instrument that blends the very best of traditional piano feel and sound quality with the latest that modern electronics technology has to offer. • Before using the instrument, be sure to carefully read through the instructions contained in this manual. • Please keep all information for future reference.
Safety Precautions WARNING Power Cord ● Improper use of the power cord can create the risk of fire and electric shock. Always be sure to observe the following precautions. • Use only the power cord specified for this digital piano. • Make sure that the power source you are using matches the rating marked on the instrument itself. • Do not use an extension cord to plug multiple devices into the same power outlet.
Safety Precautions Precautions concerning smoke, abnormal odor, and other abnormalities Continued use of the digital piano while it is emitting smoke or abnormal odor, or while it is displaying other abnormalities creates the risk of fire and electric shock. Immediately perform the following steps whenever you notice any abnormality. 1. Turn off the digital piano power. 2. Unplug the digital piano from its power outlet. 3. Contact your original retailer or an authorized CASIO service provider.
Safety Precautions Never climb onto the digital piano or stand. Doing so can cause the digital piano to fall over, creating the risk of personal injury. Special care concerning this item is required in households where there are small children. Connector Connect only the specified devices to the digital piano's connectors. Connecting nonspecified items creates the risk of fire and electric shock. Location Avoid locating the digital piano in the following types of areas.
Main Features ❐ 16 versatile tones 16 instrument tones including piano and pipe organ provide plenty of performance versatility. An easy setting lets you control the brilliance of each tone, and a layer feature lets you assign two tones to sound simultaneously. Other features include digital effects that control the acoustical characteristic of tones, as well as three pedal effects for all the nuances of an acoustic piano.
Contents Safety Precautions ................ E-2 Keyboard Settings .............. E-28 Using Touch Select ................................ E-28 Main Features ........................ E-6 General Guide ........................ E-8 Connecting to a Power Outlet .................................... E-10 To connect to a power outlet .................. E-10 Using Transpose .................................... E-28 Adjusting the Tuning of the Digital Piano ... E-29 Temperament ..................................
General Guide 1 2 3 4 56 7 890ABC D E Front G F I H J* Bottom K * With the AP-45, the power cord is hard-wired to the bottom of the instrument.
General Guide CAUTION Make sure that the cover of the digital piano is fully open whenever you are playing on the keyboard. A partially open cover can suddenly close unexpectedly and pinch your fingers.
Connecting to a Power Outlet You can power this digital piano by plugging it into a standard household power outlet. Be sure you turn off power whenever the digital piano is not in use. To connect to a power outlet 1 IMPORTANT! • Power should also be turned off before you unplug the digital piano from the wall outlet. • The shapes of the digital piano’s power cord and wall outlet should be different according to countries or regions. The illustrations are examples.
Connections Connecting to an audio or musical instrument amplifier provides even clearer, more powerful sound through external speakers. Audio amplifier AUX IN, etc. Bottom LEFT (White) PIN plugs RIGHT (Red) Headphones Guitar amplifier, keyboard amplifier, etc. Standard jacks INPUT 1 INPUT 2 Standard plug IMPORTANT! • Whenever connecting external equipment, first set the VOLUME slider of the digital piano and the volume controller of the external equipment to relatively low volume settings.
Basic Operation Using Tones To select a tone The following procedures describe everything you need to know about selecting and using tones. 1 2 Selecting a Tone This digital piano has a selection of 16 built-in tones. 3 Tone Buttons GRAND PIANO 1 PIPE ORGAN 1 ELEC PIANO 1 GRAND PIANO 2 HARPSICHORD STRINGS 1 ACOUSTIC BASS Press one of the tone buttons to select the tone you want. Use the VOLUME slider to adjust the volume. • It is a good idea to set the volume to a relatively low level at first.
Basic Operation Using Layer With layer you can assign two different tones (a main tone and a layered tone) to the keyboard, both of which play whenever you press a key. Main tone + Layered tone To layer two tones NOTE • To use the variation tone for the main tone and/or the layer tone, perform the required operation to turn on the variation tone(s) before starting the procedure below. 1 While holding down the tone button of the main tone, press the tone button for the layer tone.
Basic Operation To adjust the volume of the main tone To adjust the volume of the layer tone 1 1 2 Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure. Press the GRAND PIANO 1 button. 2 • This causes the indicator lamp above the button to flash. 3 Use one of the procedures below to set the main tone volume to a value in the range of 40 to 127. Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure.
Basic Operation Using Split With split you can assign two different tones (a main tone and a split tone) to either end of the keyboard, which lets you play one tone with your left hand and another tone with your right hand. How digital effects are applied when split is turned on The following are the rules that determine what type of digital effects are applied to tones that are assigned to a split keyboard.
Basic Operation To adjust the volume of the split tone 1 2 Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure. Press the ELEC PIANO 1 button. • This causes the indicator lamp above the button to flash. 3 Use one of the procedures below to set the split tone volume to a value in the range of 40 to 127. • To scroll the volume setting value: While holding down the SETTING button, use the + (increase) and – (decrease) keys to scroll the volume setting value.
Basic Operation Keys Used for Configuring Digital Effect Settings Using Digital Effects This digital piano provides you with a selection of digital effects that you can apply to tones. The following provides general descriptions of each effect, but the best way to find out how they affect tones is to experiment for yourself. Digital Effect Keys Digital Effect Types REVERB The REVERB effect gives you a choice of the eight variations listed below.
Basic Operation Power on default effect settings The table below shows the effect settings that are assigned to each tone whenever you turn on the digital piano power. Tone Name Using the Pedals This digital piano comes equipped with the three pedals shown in the illustration below.
Basic Operation To apply pedal effects to a split tone 1 While holding down the SETTING button, turn pedal effects on or off by pressing one of the keyboard keys shown in the illustration below. B 0 : ON Using the Metronome The metronome provides a reference beat that you can use during your performances or practice sessions. You can change the beat and the tempo of the metronome. • The illustration below shows the keyboard keys you use when configuring metronome settings.
Basic Operation Using the Metronome PREPARATION • Check to make sure that the indicator above the RECORD button is off. If the indicator is on, press the RECORD button to turn it off. • See the section of this User’s Guide covering the song memory for details on using the metronome in combination with the function. To use the metronome 1 2 Press METRONOME to start the metronome. Set the beat of the metronome.
Using the Song Memory This section describes how to record keyboard play to memory and playback data from song memory. About the Song Memory Song Memory Capacity • There are two song memory tracks named Track A and Track B. The two tracks can store a combined total of approximately 8,000 notes. • Recording stops automatically and the indicator above the RECORD button goes out whenever memory becomes full.
Using the Song Memory 3 Recording In addition to recording notes as they are played on the keyboard, you can also record to one track while playing back from the other track. The following procedures cover each of these operations. SONG MEMORY RECORD TRACK A PART L TRACK B PLAY/STOP • The indicator above the button you press flashes to indicate that the track is selected for recording.
Using the Song Memory Playback Deleting Song Memory Contents Use the following procedure to play back from song memory. IMPORTANT! To play back from song memory 1 Press the SONG MEMORY button. • The delete operation cannot be undone. Make sure you play back song memory contents and confirm that you no longer need it before performing the following procedure. • This causes the indicator lamp above the button to light. 2 Press the TRACK button of the track you want to play back (A or B).
Using Demo Tunes This digital piano comes with 16 built-in demo tunes, each of which features one of the built-in tones. Stopping Demo Tune Play To stop demo tune play Playing the Demo Tunes in Sequence To play the demo tunes in sequence 1 Press the MUSIC LIBRARY button to start demo tune play. • All the demo tunes play in sequence, starting from Tune 1.
Using Music Library Once you select one of the 50 built-in Music Library tunes, you can cut either the left-hand or right-hand part (primo and secondo part for duet tunes) and play along on the keyboard. You can adjust the tempo to play along at the pace that’s comfortable for you, and you can use the metronome to help you keep in time. See “Music Library Tunes” on page A-3 for full list of available Music Library tunes. Duet tunes are those marked “(Duets)”.
Using Music Library NOTE • When you press the MUSIC LIBRARY button, the number of the song that was selected the last time you used the Music Library appears first. • You can change the tempo of playback after you select a tune. You can return the tempo of a tune to its preset level by selecting the same tune again (step 2 of the above procedure).
Using Music Library To use Part Lesson 1 Press the PART L or PART R button to select the part you want to play on the keyboard. • Pressing either button causes the indicator above the other button to go out. ■To practice the right-hand (or primo) part, press the PART R button. PART R button indicator: Off PART L button indicator: On ■To practice the left-hand (or secondo) part, press the PART L button. PART R button indicator: On PART L button indicator: Off 2 Turn on the metronome, if you want.
Keyboard Settings Using Touch Select Using Transpose This setting lets you adjust the touch of the keyboard to suit your own playing style. This means you can select a stronger touch for those with powerful hands, and a lighter touch for beginners and anyone else with less strength. Use the keys shown below to change the Touch Select setting. Transpose lets you adjust the pitch of this digital piano in semitone steps.
Keyboard Settings Adjusting the Tuning of the Digital Piano You can adjust the overall tuning of the digital piano for play along with another instrument. You can adjust tuning within a range of ±50 cents* from A4 = 440.0Hz. Use the keyboard keys noted below to adjust the tuning of the digital piano. Setting keys Temperament Modern pianos employ a tuning system called “Equal Temperament,” which is also used by your digital piano.
Keyboard Settings 3 Select a root by pressing one of the keys in the range shown in the illustration below. Remember to keep the SETTING button depressed. • The note for the keyboard key you press is applied as the root. If you press key F5, for example, the root becomes F. F 4 F5 • No sound is produced when the keys are pressed. • When Baroque Pitch (page E-31) is ON, the root is a half-note higher than the key you press. This means that to set a root of C, you should press B4.
Keyboard Settings Using Baroque Pitch During the Baroque Era, standard pitch (A4) was lower than the modern standard. The Baroque pitch setting of your digital piano lets you play Baroque era music at the pitch it was written for. Use the keys shown below to change the Baroque pitch setting. Setting Range G5 A 5 (black key) •A 5 .... ON: Baroque pitch (A4 = 415.3Hz) •G5 ..... OFF: Modern standard (A4 = 440.0Hz) To turn Baroque pitch off and on 1 2 Hold down the SETTING button.
MIDI What is MIDI? Specifying the Keyboard Channel MIDI is a standard for digital signals and connectors that allows musical instruments, computers, and other devices, regardless of manufacturer, to exchange data with each other. The keyboard channel is the channel used when sending MIDI messages to another MIDI device. You can specify any channel from 1 through 16 as the keyboard channel.
MIDI Sending Song Memory Playback Data You can send song memory playback as MIDI data. The send channel used depends on the keyboard channel setting, as shown in the table below.
MIDI Tone Change Data (Program Change) A program number is data used for tone selection. Program numbers come in handy when using the tones of this digital piano to play MIDI data received from an external sequencer or other MIDI device. When the program number received from another devices does not match one of the built-in tones of this digital piano, however, the tone change is ignored and play continues without a tone change.
Troubleshooting Symptom No sound produced when keyboard keys are pressed. Possible Cause 1. VOLUME slider set to MIN. 2. Headphones connected to the digital piano. 3. Local Control turned off. Keyboard out of tune. 1. Transpose is set to a value other than 0. 2. Incorrect tuning setting 3. Baroque pitch is turned on. Action Reference 1. Move VOLUME slider more towards the MAX side. 2. Disconnect the headphones from the digital piano. 3. Turn on Local control. Page E-12 1.
Assembly Instructions CAUTION • Take particular care to avoid injury when installing legs and pedals, and when mounting the keyboard onto the stand. • When assembling, make sure that the sliding keyboard cover of the digital piano body is completely closed. If the cover is left open during assembly, it may close suddenly causing the fingers to be pinched between the digital piano body and cover.
Assembly Instructions Figure 4 B A (Back) F 2 Installing the Keyboard onto the Stand C CAUTION Take care that you do not pinch your fingers between the keyboard and stand! G I 5 Figure 6 G F I 4 8 I 8 H 6 2. Attach back panel C to the 4 brackets and crosspiece D. Note that the back panel C should be installed so it is in front of the 4 brackets (Figure 4). Use the two I screws, six F screws to secure the back panel in place (Figures 3 and 4).
Assembly Instructions CAUTION • The screws that you use to assemble the stand may become loose after a long period due to changes in temperature and humidity, or vibration caused by normal use, etc. Periodically check the screws used to fasten the stand and the butterfly bolts used to fasten the stand and the digital piano, and tighten them whenever necessary.
Specifications All of the items in these specifications apply to the AP-45 and AP-45V, unless specifically noted otherwise.
Operational Precautions Locating the Unit Avoid the following locations. • Areas exposed to direct sunlight and high humidity • Areas subjected to very low temperatures • Near a radio, TV, video deck, or tuner (unit can cause interference with audio or video signals) You may notice lines in the finish of the case of this product. These lines are the result of the molding process used to shape the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern.
Appendix/Apéndice Initial Power On Settings The table below shows the initial settings of the digital piano whenever power is turned on. Item Tone Digital Effect Setting GRAND PIANO 1 Reverb Hall 1 (GRAND PIANO 1) Chorus Off (GRAND PIANO 1) Layer Off (Layer Volume: 72) Split Off (Split Volume: 127), Split point: B3 Metronome Volume 2 Tempo 120 Beat 4 Playback Track Recorded track Touch Select Normal Transpose C Tuning A4 = 440.
Appendix/Apéndice Ajustes iniciales al activarse la alimentación La tabla siguiente muestra los ajustes iniciales del piano digital siempre que se activa la alimentación.
Appendix/Apéndice Music Library Tunes/Melodías de la biblioteca musical Tune Number/ Número de melodía 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 430A-E-087A Tune Name/Nombre de melodía Klavierbüchlein für Anna Magdalena Bach “Menuet” Invention No.1 Invention No.8 Invention No.13 Wohltemperierte Klavier I Praeludium 1 Goldberg-Variationen Aria Goldberg-Variationen Var.30 Sonata K.545 1st Mov. Sonata K.331 1st Mov. Theme Sonata K.331 3rd Mov.
A-4 Byte 2 kkH kkH Byte 1 8nH 9nH 00H vvH Byte 3 Byte 2 kkH Byte 1 8nH vvH Byte 3 Byte 2 kkH Byte 1 9nH vvH Byte 3 Byte 2 kkH Byte 1 9nH vvH Byte 3 n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16) kk ........ Note Number = 15H to 6CH vv ........ Note On Velocity = 01 to 7FH Format Send n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16) kk ........ Note Number = 00H to 7FH vv ........ Note On Velocity = 00H to 7FH Format Recognition Note On n ..........
430A-E-089A 42H BnH Byte 3 vvH Byte 2 43H BnH vvH Byte 3 Byte 2 47H Byte 1 BnH vvH Byte 2 48H Byte 1 BnH vvH Byte 3 Byte 2 49H Byte 1 BnH vvH Byte 3 n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv ........ AMP Attack Time = 00H to 7FH Format Attack Time ★ n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv ........ AMP Release Time = 00H to 7FH Format Release Time ★ n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv ........
A-6 Recognition When the instrument receives this message, the preset Filter/ AMP Envelope Decay Time value for the tone is changed to the value that corresponds to the data entry MSB of the received message. There is no change when the value of the data entry MSB is 40H(0). mm ....
430A-E-091A Byte 2 78H Byte 1 BnH 00H Byte 3 Byte 2 79H Byte 1 BnH 00H Byte 3 msb = 7FH, lsb = 7FH llH mmH = 00H 40H RPN msb = 7FH, lsb = 7FH NRPN Pitch Bend Change vvH = 00H vvH = 00H Sostenuto Soft vvH = 00H vvH = 00H Hold 1 Portamento vvH = 7FH Expression Controller Reset Value vvH = 00H Modulation Wheel Controller Name Recognition Receipt of the Reset All Controller message causes the following controllers to be reset. n ..........
A-8 7FH 7F 04 05 01 01 01 01H 01 01 F7H pp vv F7 7F 04 05 Chorus Type pp = 0; vv = 0: Chorus1 = 1: Chorus2 = 2: Chorus3 = 3: Chorus4 = 4: F-backChorus = 5: Flanger = 6: Short Delay = 7: ShortDelayFB F0 7F Format Chorus Type 01 01 01 01 Receive Receipt of this message sets the reverb type. 02 pp vv F7 This message is sent when a reverb switch operation or other reverb type setting operation is performed.
430A-E-098A O 9nH V = 1-127 X 9nH V = 0,8nH V=** X X O O O O O*1 O O O O O O O O O 9nH V = 1-127 X 8nH V = 64 X X X O X X O*1 X X X O X O O X 0,32 1 5 6.38 7 10 11 64 65 66 67 71 0-127 0-127 21-108 ❊❊❊❊❊❊❊❊❊❊❊❊❊❊ Key’s Ch’s After Touch Control Change Pitch Bender Note ON Note OFF Velocity True voice Mode 3 X ❊❊❊❊❊❊❊❊❊❊❊❊❊❊ Mode 3 X ❊❊❊❊❊❊❊❊❊❊❊❊❊❊ Default Messages Altered Mode Note Number 1-16 1-16 1 1-16 Recognized Transmitted MIDI Implementation Chart Default Changed Function ...
430A-E-099A X X X O O X X X X O X X : Clock : Commands : Local ON/OFF : All notes OFF : Active Sense : Reset System Real Time Aux Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Remarks *2: *2: *1: Release Time Attack Time Portamento Control Brightness Reverb send Chorus send NRPN LSB, MSB RPN LSB, MSB All sound off Reset all controller Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO O : Yes X : No Fine tune and coarse tune send/receive, and RPN Null, pitch bend sense, vibrato rate, vibrato dept
This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado conforma a la legislación de protección ambiental en Alemania. CASIO COMPUTER CO.,LTD.
