User Manual

CT-S1000V
Quick Start Guide
For more detailed information about the product and its operation, visit the CASIO website.
Available Information: User’s Guide, etc.
https://support.casio.com/global/en/emi/manual/CT-S1000V/
EN
Preparation
Basic Operation Playing with an Instrument Tone
1
Light the INSTRUMENT LED.
To select an Instrument Tone
2
Category No. Category No.
PIANO
1 - SYNTH-BRASS 321 -
HARPSICHORD 32 - SAX 332 -
ELEC.PIANO 36 - REED 355 -
CLAVI
65 - PIPE 362 -
VIB./CHR.PERC. 73 - SYNTH-LEAD 380 -
ELEC.ORGAN 88 - SYNTH-PAD 457 -
PIPE ORGAN 126 - CHOIR 512 -
ACCORDION 130 - EDM SYNTH 530 -
ACOUS.GUITAR 140 - CASIO CLASSIC 544 -
ELEC.GUITAR 157 - INDIAN 560 -
ACOUS.BASS 212 - INDONESIAN 580 -
ELEC.BASS 215 - ARABIC 590 -
SYNTH-BASS 248 - CHINESE 603 -
SOLO STRINGS 262 - BRAZILIAN 623 -
STRING ENS. 271 - ETHNIC OTHERS 627 -
SOLO BRASS 292 - GM TONES 637 -
BRASS ENS. 305 - DRUM SET 765 -
To change the keyboard’s high-
range and low-range tones
2
SP
3
Select a tone for the keyboard’s low
range.
To play with two layered tones
2
LY
3
Select the tone you want to layer.
To play with Touch Response
2
OFF: No Touch Response.
LIGHT: Louder notes with lighter touch than
NORMAL.
NORMAL: Normal Touch Response.
HEAVY: Louder notes require a heavier
touch than NORMAL.
OFF
LIGHT
NORMAL
HEAVY
To play with sustain
2
SUS
To sound arpeggio phrases
automatically
2
ARP
3
Enable the arpeggiator.
Long-press
4
Select a type.
5
Play single notes and chords.
Playing with a Lyric Tone (Vocal Synthesis)
1
Light the LYRICS LED.
This enables Lyric Tone so that the
lyrics are advanced and sounded while
keyboard keys are pressed.
To select Lyric Tone and then use
the knobs to change the tone
2
3
K1 knob
K3 knob (left side of product)
K2 knob
To change how lyric advancement
is performed when one or more
keyboard keys are pressed
2
PHRASE: Lyrics advance while a keyboard
key is held down.
NOTE: Each press of a keyboard key
advances one lyric syllable.
PHRASE
NOTE
To change the voice used to sound
lyrics (Vocalist)
2
3
To use keyboard keys to control Lyric Tone
2
KC
3
Play your performance on the
keyboard in combination with the Lyric
Tone controller keyboard.
Lyric Tone controller keyboard
Performance keyboard
Keyboard
Note
Name
Syllable
Location
Description
C2 Syllable 1
You can specify
the next syllable
position to
be sounded.
Syllables are
sounded from the
specified position
for as long as the
keyboard key is
depressed.
D2 Syllable 2
E2 Syllable 3
F2 Syllable 4
G2 Syllable 5
A2 Syllable 6
B2 Syllable 7
C3 Syllable 8
D3 Syllable 9
E3 Syllable 10
F3 Syllable 11
Keyboard
Note Name
Description
C
{
2 Syllable chord control
function
Lyrics are advanced by a
change in the chord played
on the low-end keyboard.
(Disabled in PHRASE mode.)
E
}
2 Random syllable sequence
Causes the next played
syllable location to be
selected randomly.
(Disabled in PHRASE mode.)
F
{
2 Retrigger
Holding down performance
keyboard keys is treated as
cyclic pressing of keyboard
keys.
A
}
2 Retrigger cycle unit note
value (–)
B
}
2 Retrigger cycle unit note
value (+)
Specifies the note value of
the retrigger cycle unit.
C
{
3 Retrigger hold
When retrigger is enabled,
retrigger hold causes
the retrigger operation
to continue even if
performance keyboard keys
are released.
B
}
3 Change knob functions
Changes the knob functions
used during Lyric Tone play.
Pitch Bend Wheel
Rotate for a smooth change in the
pitch of a note that is sounding.
Pedal
Sustains notes played while the pedal is
depressed. Even if the keys played are
released, notes are sustained as if the
keys remain pressed, until the pedal is
released.
You can connect a commercially
available expression pedal to the
PEDAL 2/EXPRESSION jack.
Auto Power Off
Automatically turns off power after
30 minutes of non-use. (On, Off
switchable)
Touch Response
Pressing a key harder produces louder
sound, while a softer key press produces
softer sound.
WIRELESS button
Press to display the wireless screen.
The first time you use this product,
press the PAIRING button and then
use your smart device to connect
with “WU-BT10 AUDIO”. This will
let you output audio from your
smart device on the product. Using
supported software to connect with
“WU-BT10 MIDI” enables use of
MIDI (connection of the included
Wireless MIDI & audio adaptor to the
product required).
Included Accessories
●
Music Stand
●
Wireless MIDI & audio adaptor
●
Strap Lock (enclosed with music stand)
●
Leaflets
● READ THIS! Sheet
● Other (Warranty, etc.)
Items included as accessories are subject to
change without notice.
After reading this document, keep it in a safe place along with the warranty certificate.
Be sure to read the “Safety Precautions” in the separate “READ THIS!” sheet, and use
the product correctly.
Preparing a Power Supply
■
Using the AC Adaptor
1
Connect the AC adaptor as shown in the
illustration on the right.
● Make sure that you use only the AC adaptor specified
for this Digital Keyboard.
■
Using Batteries
1
Open
Bottom of console
2
Load six AA-size batteries.
3
Tabs
Close
4
Specify the battery type.
See “Configuring Function Settings” on the reverse
side of this sheet.
TONE button
Press to display the tone
selection screen. Rotate the
dial to change the tone.
Dial
Rotate to change a displayed
number or value.
VOLUME knob
Rotate to adjust overall volume.
P
(Power) button
Press to turn on power. Long-
press to turn off power.
HOME button
Press to return to the Home
screen. (Home Customization
supported.)
Wireless MIDI & audio
adaptor or USB flash drive
(commercially available)
Headphones
(sold separately)
Portable audio player, etc.
(commercially available)
Pedal (sold separately)
Back
Computer, smartphone, etc. (commercially available)
• Connect using a USB cable that is no more than two meters long.
To install the music stand
Insert the stand into the holes
on the back of the console.
Power cord
AC adaptor
RIGHT (Red)
LEFT (White)
Audio amplifier AUX IN jacks, etc.
(commercially available)