User's Manual

Playing on the Keyboard
EN-9
The metronome lets you play and practice along with a steady
beat to help keep you on tempo. You can also set a tempo
that is suitable for your practice.
1. Press HOME.
This displays the home screen.
2. Press a.
This starts the metronome.
3. Press a again to stop the metronome and
return to the home screen.
Use the procedure below to change the tempo of the
metronome.
1. Start the metronome.
2. Press TEMPO.
This displays the [TEMPO] screen.
3. Rotate the dial or use the – and + buttons to
change the tempo value.
• You can specify a tempo value in the range of 20 to
255.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To return to the [METRONOME] screen, press the
EXIT button.
You can use the procedure below to configure a setting that
sounds a chime on the first beat of each measure, and a click
for the remaining beats.
• Available settings are Off, or a value of 1 to 16 beats.
1. Start the metronome.
2. Rotate the dial or use the – and + buttons to
specify the number of beats per measure.
• Selecting “Off” disables the chime and sounds a click
for all beats. Use this setting when you want to
practice without worrying about the first beat of each
measure.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To display the metronome volume level setting screen,
press VOLUME (3 buttons).
1. Start the metronome.
2. Press VOLUME (3 buttons).
This displays the metronome volume level setting
screen.
3. Rotate the dial or use the – and + buttons to
change the volume value.
• You can specify a volume value from 0 to 127.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To display the beat setting screen, press the BEAT
button.
Using the Metronome
Start/Stop
Changing the Metronome Tempo
Specifying the Metronome Sound and Beats
Per Measure
Changing the Metronome Sound Volume
Level