User's Manual

Saving and Loading Instrument Settings (MY SETUP)
EN-14
1. Press MY SETUP.
This displays the [MY SETUP] screen.
2. Press the LOAD button.
This causes “Sure?” to appear on the display. The name
of the main setting (TONE, RHYTHM, SONG, DANCE
MUSIC) also appears.
• To go back to the previous screen, press the BACK
button.
3. Press the YES button.
This recalls the saved settings.
4. When “Complete” appears on the display,
press the OK button.
This completes the recall operation.
Use the procedure below to enable MY SETUP power on,
which causes the MY SETUP settings to be applied whenever
the Digital Keyboard is turned on.
1. Press FUNCTION.
This displays the [FUNCTION] screen.
2. Use the U and I buttons to select
“PowerOnMySetup”.
• To go back to the previous screen, press the EXIT
button.
3. Rotate the dial to the right to select “On”.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To go back to the previous screen, press the BACK
button.
4. Press FUNCTION to exit the setting screen.
Recalling From MY SETUP
Enabling MY SETUP Power On