User's Manual

Playing with a Rhythm Backing
EN-24
4. Press a.
This starts the rhythm and displays the beat.
5. To stop the rhythm, press a again.
Use the procedure below to change tempo to a speed that
suits you.
1. On the [RHYTHM] screen, select the name of
the rhythm whose tempo you want to change
and then press TEMPO.
This displays the [TEMPO] screen.
2. Rotate the dial to change the tempo setting.
• You can specify a tempo value in the range of 20 to
255.
• You can also use the – and + buttons to change the
setting. Press the – button to make the tempo slower
or the + button to make it faster. Holding down either
button scrolls the setting value.
• To return to the recommended setting, press – and +
at the same time.
• To go back to the previous screen, press the EXIT
button.
Use the procedure below to adjust the balance between the
volume levels of keyboard play and the rhythm.
1. Press FUNCTION.
This displays the [FUNCTION] screen.
2. Use the U and I buttons to select “Rhythm
Volume”.
• To go back to the previous screen, press the EXIT
button.
3. Rotate the dial to adjust the rhythm volume
level.
• You can specify a volume value from 0 to 127.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To go back to the previous screen, press the BACK
button.
4. Press FUNCTION to exit the setting screen.
Changing the Tempo of a Rhythm
Changing the Volume Level of a Rhythm