User's Manual

Playing with a Rhythm Backing
EN-25
1. While a rhythm is playing, press HOME.
The selected tone number and instrument name will
appear on the display.
2. Rotate the dial to select a tone.
• For tone information, see the “Tone List” (page
EN-39).
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return to the first tone in the tone list, press – and +
at the same time.
• To go back to the previous screen, press the BACK
button.
You can use the procedure below to use tone, and tempo
settings that are most suitable for a particular rhythm pattern.
1. On the [RHYTHM] screen, select a rhythm
name and then long-press FUNCTION.
This momentarily displays “RECOMMENDED” and
configures the recommended rhythm settings.
You can use the procedure below to add liveliness to your
rhythm pattern by playing intro and ending patterns, fill-in
patterns, and variations of basic rhythm patterns.
Each Auto Accompaniment pattern has a basic “normal
pattern” as well as a “variation pattern”. This lets you play a
pattern that is different from the Normal Pattern.
1. In the Rhythm Mode, press the PTRN button.
This causes “VAR2” to appear on the display.
• Press the PTRN button again to return to the “VAR1”
screen.
2. Press a.
This starts the rhythm for the pattern you selected.
• If you press the PTRN button while a rhythm is playing,
the pattern will change from the beginning of the
following measure.
Changing the Keyboard Tone While a
Rhythm is Playing
Using Recommended Rhythm
Settings
Changing the Rhythm Pattern