User's Manual

EN-7
Operations assigned to the three buttons along the bottom of
the display change according to the setting you are
configuring. Operations currently assigned to the three
buttons are indicated by labels above the buttons.
■ Home Screen (Tone Selection Screen)
■ Setting Screen
• Holding down the – or + button when selecting a number or
value will scroll through settings at high speed.
• To return a number or value to its initial default or
recommended setting, press the – and + buttons at the
same time.
Rotate the dial to change a number (tone number, etc.) or
value (tempo value, etc.)
1. Press P (Power).
This turns on power.
• To turn off power, hold down P (Power) until the
display goes blank.
2. Play something on the keyboard.
• Turning off power normally causes the tone and
rhythm number and other settings to return to their
initial defaults. However, the settings below are
remembered.
− MIDI Out Channel
− MIDI Out Octave Shift
− MIDI Out Velocity
− Startup volume level
− MY SETUP Startup
− Auto Power Off
− Battery type
− LCD contrast
3 Buttons
3 Button Examples
Dial Operations
Playing on the Keyboard
Turning Power On or Off