User manual - EXZR20_M29_FA

Snapshot Tutorial

With the Self-timer, pressing the shutter button starts a timer. The shutter is released

and the image is shot after a fixed amount of time.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fourth control panel option from the

bottom (Self-timer).

3. Use [4] and [6] to select the setting you want and then press [SET].

• The front lamp flashes while the Self-timer countdown is in

progress.

• You can interrupt an ongoing Self-timer countdown by

pressing [SET].

NOTE

• The Self-timer cannot be used together with the following features.

High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction, Slide

Panorama, Wide Shot

• The Triple Self-timer cannot be used together with the following features.

Movie, High Speed CS, Multi SR Zoom, High Speed Best Selection, High Speed

Night Shot, For YouTube, Blurred Background

Using the Self-timer (Self-timer)

10 sec 10-second Self-timer

2 sec

2-second Self-timer

• When shooting under conditions that slow down the shutter

speed, you can use this setting to prevent image blur due to

camera movement.

×3

(Triple Self-

timer)

Shoots three images: one image 10 seconds after the shutter

button is pressed, and the next two images as soon as the camera

is ready after shooting the previous image. How long it takes for the

camera to get ready to shoot depends on the image size and quality

settings, whether or not a memory card is loaded in the camera,

and the flash charge condition.

Off Self-timer is disabled.

Front lamp