EN App for a Smartphone or Tablet Terminal EXILIM Link User’s Guide • The procedures in this manual are performed tying a typical smartphone/tablet. Certain details (display contents, etc.) may differ on the device you are actually using. • Keep the User’s Guide in a safe place for future reference.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What you can do with EXILIM Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Ready to Establish a Connection between a Smartphone and Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ] ] Installing the EXILIM Link App on Your Smartphone . . . . . . . . . . . . . . . . . . .
What you can do with EXILIM Link Installing EXILIM Link on your smartphone and then establishing a connection with your camera enables the functions described below. For details about how to install EXILIM Link, see the user documentation that comes with your digital camera. With this function: You can do this: See page: Remote Capture (Certain camera models) Remotely control and shoot with the camera using a smartphone.
NOTE • Note that using wireless LAN functions requires more battery power usage than normal. Make sure that the camera battery is sufficiently charged before starting a wireless LAN operation. • The operating range depends on the local communication environment and on the type of smartphone you are connected to. Getting Ready to Establish a Connection between a Smartphone and Your Camera Installing EXILIM Link on a smartphone enables remote control of the camera from your phone.
Establishing a Wireless Connection for the First Time The first time you establish a wireless LAN connection between a smartphone and your camera, you will need to configure your phone’s wireless LAN settings, and input the camera’s SSID and password. For information about how to do this, refer to your camera’s user documentation. Once you configure wireless LAN settings, you will not need to configure them again.
Change camera’s SSID and password before using wireless LAN With some camera models, you will need to configure your phone’s wireless LAN settings, and change the camera’s SSID and password the first time you establish a wireless LAN connection with a smartphone. Certain camera models have the same SSID and password when they are shipped from the factory.
Using a Smartphone as a Camera Remote Controller (Remote Capture) With some camera models, you can remotely control snapshot and movie recording from a smartphone. You also can perform remote zoom, self-timer, and other operations as well. 1. Enable the camera’s wireless function. See your camera user documentation for information about what you need to do to enable wireless. 2. On your smartphone, start up the EXILIM Link app. 3. On the smartphone, tap “Connection starting”.
NOTE • Images shot with Remote Capture can also be stored on the smartphone at the time when the image is shot. To do so, tap 1, select “Synchronous Save”, and then select “On”. Sending a Snapshot or Movie File from Camera Memory to a Smartphone You can select one or more snapshot and/or movie file in camera memory and send it to a smartphone. You can select up to 99 files, totaling no more than 1500MB for a single send. 1. Enable the camera’s wireless function.
NOTE • You can use the smartphone apps below to view snapshots after sending them. – iPhone: Camera Roll – Android terminal: Gallery or another photo browser app • In the case of an iPhone, sent snapshots cannot be deleted with the EXILIM Link app. To delete an image, use Camera Roll. • With some camera models, you can specify the size of snapshots sent to the smartphone using the camera’s “Resize before send” feature.
Trouble shooting The camera won’t send movies. * EXILIM Link has a maximum file size limitation when sending files. Movie files that are 1500MB or greater in size cannot be sent. The camera cannot connect with a smartphone. * If the smartphone or other device has a Wi-Fi connection auto switching function (auto network switching), the function may be affecting the connection with the camera. Disable Wi-Fi connection auto switching (network auto switching) by clearing the setting’s check box, etc.
Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
CASIO COMPUTER CO., LTD.
