User manual - Web_Browser_Prog_Guide

NAURTECH WEB BROWSER SMART CLIENTS FOR WINDOWS CE .NET / POCKET PC

Web Browser Programming Guide Page 19

<head>

</head>

<body>

This message should not be visible.

</body>

</html>

3.2 BATTERY

The Battery tag is used to configure the on-screen battery strength meter. This

meter overlays the HTML content and is updated at a specified interval. You can

change the location and style of the meter. Available styles include a horizontal

or vertical single bar meter or filled battery icon. The meter may be repositioned

by a “touch and drag” stylus action if dragging is not disabled.

Syntax

http-equiv="Battery"

content="Show"

"Hide"

"Right"

"Left"

"Top"

"Bottom"

"x=n"

"y=m"

"HBattery"

"VBattery"

"AllowDrag"

"NoDrag"

Where x and y are the screen coordinates of the upper left corner of the meter

icon. The screen coordinate (0, 0) is in the upper left corner of the screen with x

increasing to the right and y increasing downward. Right, Left, Top, and Bottom

change the orientation of the meter and the placement of the icon. HBattery

enables a horizontal battery icon filled according to strength. VBattery enables a

vertical battery icon filled according to strength. AllowDrag will allow the user to

drag the meter, whereas NoDrag will prevent dragging.

Comments

This tag is used to control the battery meter display. The meter may also be

controlled within the CETerm configuration, independent of the Battery tag. The

Battery tag will always override the internal configuration and will persist until

changed by another Battery tag. Within the CETerm configuration you can