User manual - Web_Browser_Prog_Guide

NAURTECH WEB BROWSER SMART CLIENTS FOR WINDOWS CE .NET / POCKET PC

Web Browser Programming Guide Page 34

Comments

If the time format is invalid, this tag is ignored.

Example

<html>

<head>

</head>

<body>

...

</body>

</html>

3.19 SIGNAL

The Signal tag is used to configure the on-screen WLAN (RF) signal strength

meter. This meter overlays the HTML content and is updated at a specified

interval. You can change the location and style of the meter. Available styles

include a horizontal or vertical single bar meter and a stepped bar meter. The

meter may be repositioned by a “touch and drag” stylus action if dragging is not

disabled.

Syntax

http-equiv="Signal"

content="Show"

"Hide"

"Right"

"Left"

"Top"

"Bottom"

"x=n"

"y=m"

"Steps"

"AllowDrag"

"NoDrag"

Where x and y are the screen coordinates of the upper left corner of the meter

icon. The screen coordinate (0,0) is in the upper left corner of the screen with x

increasing to the right and y increasing downward. Right, Left, Top, and Bottom

change the orientation of the meter and the placement of the WLAN icon. Steps

enables the step style meter. AllowDrag will allow the user to drag the meter,

whereas NoDrag will prevent dragging.

Comments