Specifications

— 6 —
(6) The first ADJ program has been done when “send ok” is displayed.
Close the program then execute “adj712k.exe”. (Fig. 4)
(7) Click [Rgain*=1.07, Bgain*=1.09] button.
● If the program has been completed correctly, screen shows “Replace complete”. (Fig. 5)
● If the program has been erroneously executed, “11RcvERR00” will be shown. (Fig. 6)
(8) The program ends.
(Fig. 4)
(Fig. 5)
(Fig. 6)
TEST MODE
WHITE NOISE DATA NO
LOADER 10
ADj. 99000212
PROG 99.02.13.20.28
GMENU 99.02.05.14.47
NOTE:The left figure is for a reference. The actual screen may differ.
ADJ program version number check
Insert CompactFlash in the camera and turn the camera on while pressing down Flash and shutter
buttons.
Check for ADJ version(displayed as; ADJ 99000212) on the TEST MODE screen. (Fig. 7)
Turn the camera off then on again and make sure that the camera records and play backs pictures
normally.
(Fig. 7)