User Manual

ManualsBrandsCasio ManualsCash registersSE-S800

Quick Start Guide

1. To set memory protection bat-

teries

To prevent losing all your settings and sales data, we

strongly recommend that you set the memory protection

batteries before you use the cash register and replace

them at least once a year.

1. Remove the printer cover by lifting it up.

2. Remove the battery compartment cover.

3. Note the (+) and (–) markings in the battery compart-

ment. Load a set of two new “AA” type manganese

batteries so that their plus (+) and minus (–) ends are

facing as indicated by the markings.

4. Replace the battery compartment cover and the

printer cover.

Important

These batteries protect information stored in your

cash register’s memory when there is a power

failure or when you unplug the cash register. Be

sure to install these batteries rst.

Warning

No battery is included in the accessories.

Never try to recharge the batteries.

Do not expose batteries to direct heat, let them

become shorted or try to take them apart.

Keep batteries out of the reach of small children.

If your child should swallow a battery, consult a

physician immediately.

There is a risk of explosion if the batteries are

replaced with improper type.

2. To set a paper roll

The following explains for setting roll paper used as

receipts. If you wish to use the paper roll for journal (sales

record), please see page E-11 of the User’s Manual.

1. Open the platen arm by lifting it up.

2. Ensuring the paper is being fed from the bottom of the

roll, lower the roll into the space behind the printer.

3. Put the leading end of the paper over the printer.

4. Close the platen arm slowly until it locks securely.

Warning

Never touch the printer’s thermal head and the

platen. Avoid the thermal paper from heat, humidity

or direct sunlight.

platen arm

5. Replace the printer cover, passing the leading end of

the paper through the cutter slot. Tear off the excess

paper.

3. To turn the cash register on

1. Insert a Mode key that comes with the cash register in

the Mode switch and turn it to OFF position.

PGM

2. Plug in the power cord into an AC outlet.

Preparations

Note: Please follow the steps described below.

Electronic Cash Register PCR-T500/T520/SE-S400/SE-S800/SE-C450

For programming assistance Please visit http://casio4business.com/sa_index.html

For Technical support Please call TOLL FREE 1-800-435-7732

QSG291C-STP*E

Summary of content (2 pages)

PAGE 1
Quick Start Guide For programming assistance Please visit http://casio4business.com/sa_index.html For Technical support Please call TOLL FREE 1-800-435-7732 Electronic Cash Register PCR-T500/T520/SE-S400/SE-S800/SE-C450 Preparations Note: Please follow the steps described below. 1. To set memory protection batteries 4. 3. 1. 4. Close the platen arm slowly until it locks securely. Warning Never touch the printer’s thermal head and the platen.
PAGE 2
Preparations Getting to know your cash register Note: Please follow the steps described below. 4. To set date, time and tax table 1. 4. Select TABLE 1 or 2 and press F key. Mode switch Before opening your store As soon as the power socket is plugged in, the display shows the language selection screen. Choose your language by using ? or > keys then press F key. • • • • 5. OP While the store is open Display changes to date and time setting screen.