EFS DATA PROJECTOR XJ-A141 / XJ-A146* XJ-A241 / XJ-A246* XJ-A251 / XJ-A256* * USB port models * Modèles à port USB * Modelos con puerto USB English Setup Guide Be sure to keep all user documentation handy for future reference. Français Guide d’installation Conservez la documentation à portée de main pour toute référence future. Español Guía de configuración Asegúrese de tener a mano toda la documentación del usuario para futuras consultas.
Contents Safety Precautions ..................................... E-1 Quick Guide ...............................................E-10 Operating Precautions ............................... E-6 Main Specifications...................................E-11 General Guide ............................................. E-9 Unpacking As you unpack the projector, check to make sure that all of the items listed below are present.
Safety Precautions Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference. About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below.
Safety Precautions ● Power cord + ● Water and foreign matter Misuse of the power cord creates the risk of fire and electric shock. Make sure that you always observe the following precautions. • Be sure to use only the accessories that come with the projector. • Make sure that you use a power source with the same voltage as that specified for the projector. • Do not overload a power outlet with too many devices. • Do not locate the power cord near a stove.
Safety Precautions ● Disposal by burning - ● Exhaust vents Never try to dispose of the projector by burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury. ● Looking into the lens or vents while light source unit is on - Never look directly into the lens or vents while light source unit is on. The strong light emitted by the projector creates the risk of eye damage. ● Blocking the vents - Never allow the vents to become blocked.
Safety Precautions ● Using the projector on a base with casters * Caution Whenever using the projector on a base that has casters, make sure that you lock the casters when not moving the base. ● Lightening During a lightening storm, do not touch the plug of the projector’s power cord. ● Remote controller ! + Never try to take the remote controller apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury.
Safety Precautions Battery Precautions Lens Cover * Danger * Warning + + Should liquid leaking from an alkaline battery get into the eyes, immediately take the following steps. 1. Do not rub the eyes! Wash the eyes with clean water. 2. Contact a physician immediately. Failure to take immediate action can lead to loss of eyesight. The lens cover of this Data Projector uses a magnetic attachment.
Operating Precautions About the Light Source Unit z The projector’s light source unit uses a laser and LED. z The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on use conditions, the settings configured on the setup menu, and differences between each individual light source unit. z The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours, whichever comes first.
Operating Precautions Other Precautions This projector is made of precision components. Failure to observe the following precautions can result in inability to correctly save data and malfunction. ● Never use or store the projector in the following locations. Doing so creates the risk of malfunction of and damage to the projector.
Operating Precautions ● Keystone Correction and Image Quality Performing keystone correction causes the image to be compressed before it is projected. This can result distortion of the image or a loss of image quality. If this happens, change orientation of the projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the Projector” in the User’s Guide on the CD-ROM that comes with the projector.
General Guide CLASS 1 LASER PRODUCT Indicators [P] (Power) key Brightness sensor Control panel Wireless adapter cover (XJ-A146/XJ-A246/XJ-A256 only) Intake vents Intake vents Lens cover (Magnetic attachment to projector) Exhaust vents Remote control signal receiver Release button Rear feet E-9 Front foot Projection lens
Quick Guide This section explains the operational flow up to the point that projection is started. For more individual operations, see the User’s Guide (UsersGuide_English.pdf) on the CD-ROM that comes with the projector. 1. Load batteries into the remote controller. ☞ “Loading Remote Controller Batteries” (User’s Guide) 2. Place the projector onto a table, desk, or stand that is level and firm, making sure that you allow enough room around it.
Main Specifications Model Name Brightness (ANSI Lumens) Environment Power Approximate Dimensions XJ-A141/XJ-A146/ XJ-A241/XJ-A246 XJ-A251/XJ-A256 2500 3000 Operating Temperature: 5 to 35°C (41 to 95°F) Operating Humidity: 20 to 80% (non-condensation) Operating Altitude: 0 to 3,000 meters (0 to 10,000 feet) above sea level Requirements 100-240V AC, 50/60Hz, 3.3A-1.4A 297 (W) × 210 (D) × 43 (H) mm (11.7" × 8.3" × 1.7") Weight Approximately 2.3kg (5.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Information This device, IEEE 802.11g Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.
Printed in China Imprimé en Chine MA1111-A RJA524095-007