User manual - UsersGuide_33_68_E

21
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table,
the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is
being input when the setting is performed, and not for a specific input source.
Volume Adjustment Main Menu
Restore Menu
Defaults
RCV Source
Specific
Use this sub-menu to return all of the sub-menu items on
the Image Adjustment 2 main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z “Image Adjustment 2” main menu “Vertical Position”,
“Horizontal Position”, “Frequency”, and “Phase” defaults
can be restored for the current signal type (XGA/60Hz,
SXGA/60Hz,etc.) only.
Setting Name Input
Setting
Unit
Description
Volume RCVUN Source
Specific
Use this sub-menu to adjust the volume level of the
projector’s speaker.
z Changing this setting when there is no input signal
changes the volume setting of the currently selected
signal source.
Restore Menu
Defaults
RCVUN Source
Specific
Use this sub-menu to return Volume to its initial default
setting.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
Setting Name Input
Setting
Unit
Description