DATA PROJECTOR XJ-350

107
User Maintenance
7. Insert the new lamp cartridge as far as it will go, as shown in the
illustration.
z After inserting the lamp cartridge, lay its handle down in the position shown in the
illustration under step 5 on page 106.
8. Secure the lamp cartridge with the three screws.
9. Return the lamp cover to its original position, and secure it with the
screw.
z After replacing the lamp, be sure to perform the procedure under “Resetting the Lamp
Time” on page 108.
z Never touch the lamp with your
hand. Doing so can cause the lamp
to rupture and shorten its life.