DATA PROJECTOR XJ-350
Remote Controller
24
6 [MUTE] key : Press to momentarily cut off the projected image and
audio output from the projector’s speaker.
) Muting the Image and Audio (MUTE) (page 58)
7 [FREEZE] key : Freezes the projected image.
) Freezing the Projected Image (FREEZE) (page 59)
8 [VOL +] / [VOL –] keys : Press the [+] key to increase volume, and the [–] key to
decrease volume.
) Adjusting the Volume Level (VOL +/–) (page 53)
9 *[MENU] key : Press this key to display the projector setup menu on the
projected image.
) Using the Setup Menu (page 61)
bk [PAGEUP] / [PAGEDOWN] keys: Press to perform page up and page down operations on
the computer connected to the projector’s USB port.
) Operating the Computer with the Remote Controller (Wireless Mouse) (page 59)
bl *[AUTO] key : Automatically adjusts the projected image in accordance
with RGB input.
) Auto Adjustment of an RGB Image (page 48)
bm [P-IN-P] key : When projecting RGB (computer) input, press this key to
project video input in a sub-window.
) Using Picture-in-Picture (P-IN-P) (page 56)
bn
[D-ZOOM +] / [D-ZOOM –] keys
: Press the [+] key to increase the size of the projected
image, and the [–] key to decrease it.
) Enlarging the Projected Image (D-ZOOM +/–) (page 54)
bo *[KEYSTONE] key : Press this key to automatically correct the projected image
and remove vertical and horizontal keystoning.
) Keystone Correction (KEYSTONE) (page 50)
bp *Cursor keys : Use these keys to perform the operations described below.
z To move the highlighting (selection cursor) on the menu screen ()page 65)
z To perform mouse operations on the computer connected to the projector’s USB port
()page 60)
z In this manual, cursor key operations are indicated as [S], [T], [W], [X].
bq *[ENTER] key : Use this key to perform the operations described below.
z To execute the command currently highlighted on the menu screen ()page 65)
z To perform a mouse left-click operation on the computer connected to the projector’s
USB port ()page 60)
br *[ESC] key : Use this key to perform the operations described below.
z When a menu screen is displayed, to back-step to the previous screen ()page 65)
z To perform a mouse right-click operation on the computer connected to the projector’s
USB port ()page 60)