DATA PROJECTOR XJ-350

Projection Operations
43
Projection O perations
This section explains operations that are related to projection of an image.
This section explains the basic steps for projecting an image.
Basic Flow
Projecting onto a Screen
Preparing the Projector
Starting
Projection
Set up the projector and point it at the screen.
 “Setting Up the Projector” (page 28)
Connect the computer or video device to the projector ( 34 to 37).
Turn on the projector and the connected computer or video device.
Press the [
] (power) key to turn on the projector.
 “Turning On the Projector” (page 38)
Perform fine adjustment of the projection position and angle.
 “Adjusting the Projector Elevation Angle” (page 32)
Select the input source.
 “Manually Selecting the Input Source” (page 45)
Adjust the projected image size and focus the image.
 “Zoom and Focus” (page 47)
Start projection (presentation, video, etc.)
• Perform the required operation on the input source computer or video equipment.
• Use the projector’s various functions to adjust the projected image as required.