DATA PROJECTOR XJ-350

Using the Setup Menu
68
Setting Screen Type Sub-menu Item
This type of sub-menu item displays a separate screen that you use to configure its settings.
Examples: Image Adjustment J Gamma Mode; Option Settings J Language, etc.
Operation: The following example shows how to configure settings for Input Settings J
Video Signal, S-Video Signal
1. On the remote controller, press the [VIDEO] key to select the VIDEO
input terminal as the input source.
2. Perform steps 2 through 4 under “Basic Setup Menu Operations” on
page 65. On the “Input Settings” main menu, select the “Video Signal”
sub-menu item.
3. Press the [ENTER] key.
z This displays the video signal selection screen shown below.
4. Use the [S] and [T] keys to highlight the item you want to select, and
then press the [ENTER] key.
5. After you are finished configuring the settings, press the [ESC] key to
close the setting screen and return to the sub-menu screen.
z After you are finished, press the [MENU] key to exit the setup menu.