DATA PROJECTOR XJ-350

Using the Setup Menu

4. After all the settings are the way you want, press the [MENU] key.

■ Image Adjustment

Vertical Position

This sub-menu lets you adjust the vertical position of the input source image within the

projection area.

z This setting is not possible when there is no input signal.

z “Image Adjustment” main menu item settings are saved for the current signal type only

(XGA/60Hz, UXGA/60Hz, etc.), and not for the input signal source. Note, however, that the

number of signal type settings that can be saved is limited. Exceeding the limit causes

the oldest setting to be deleted automatically.

■ Image Adjustment

Horizontal Position

This sub-menu lets you adjust the horizontal position of the input source image within the

projection area.

z This setting is not possible when there is no input signal.

z See “Image Adjustment J Vertical Position” for details about how settings are saved.