DATA PROJECTOR XJ-350

Using the Setup Menu

z Besides the menu operation explained above, the following operations can also be used

to turn off key lock.

z While the projector is on: Hold down the projector’s [ESC] key for about five seconds.

z While the projector is off: Simultaneously hold down the projector’s [ESC] and [ ]

(power) keys for about five seconds. This turns on the

projector and also turns off key lock.

z You can use the above projector operations to turn off key lock if the remote controller

batteries unexpectedly go dead, etc.

■ Option Settings

Custom Logo Settings

With this sub-menu, you can cut part of the projected screen and use it to create an original

logo, which you can display for the startup screen, the no signal screen, and the mute

screen. An original logo that you create is called a “custom logo”. The custom logo settings

let you create a custom logo, view your custom logo, and perform other operations.

z Custom logo settings cannot be configured when there is no input signal.

z A single custom logo is stored, which is applied to all input sources.

Capturing a Custom Logo Image

You can create a custom logo by capturing part of an image that is currently being

projected by the projector.

z The display size and position of a custom logo created by capturing an image depend on

the configuration of the following settings when you capture the image: Logo Vertical, Logo

Horizontal, Custom Logo Zoom, Background Color, and Resolution. Make sure that you

configure these settings the way you want before performing the image capture operation.

For details of these operations, see “Configuring Custom Logo Capture Settings” on page

95.