DATA PROJECTOR XJ-350
99
Using the Setup Menu
■ Option Settings
J
Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Option Settings main menu to their
initial default settings.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z The Auto Adjust item is initialized only when RGB is selected as the input source. All
other items are always initialized, regardless of the currently selected input source.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 70.
Operational Info
■ Operational Info
J
Lamp Time
This sub-menu item shows the cumulative number of hours the current lamp has been used
to date.
Use this value as a reference when deciding whether or not the current lamp needs to be
replaced. For details about replacing the lamp, see “Replacing the Lamp” on page 102.
■ Operational Info
J
Reset Lamp Time
Use this submenu item to reset the lamp time to 0 hours. For details about replacing the
lamp and the initialization procedure, see “Replacing the Lamp” on page 102.
■ Operational Info
J
Input Signal
This sub-menu item shows the currently selected input signal (RGB, Component, S-VIDEO, or
VIDEO). “None” is indicated here when there is no input signal.
■ Operational Info
J
Signal Name
This sub-menu item shows the signal name of the signal input to the projector. The “Signal
Name” column of the table under “Supported Signals” on page 116 shows the signal names
that are displayed by this sub-manu item.
■ Operational Info
J
Index
This sub-menu item appears only when RGB or Component is the input signal. It shows
projector internal information.
■ Operational Info
J
Resolution
This sub-menu item appears only when RGB is the input signal, and shows the resolution of
the RGB input signal in terms of vertical and horizontal pixels.
■ Operational Info
J
Horizontal Frequency
This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input
signal. It shows the horizontal frequency of the input signal.
■ Operational Info
J
Vertical Frequency
This sub-menu item appears only when RGB, Component, S-VIDEO, or VIDEO is the input
signal. It shows the vertical frequency of the input signal.