User`s guide

E-9
Operating Precautions
When packing the equipment into the carrying bag, it is best to remove the PJ Camera from the
PJ Camera Stand and pack the camera in the special pocket provided for it. This helps to ensure
that the PJ Camera is protected against impact during transport.
The camera and stand are made of precision components. Failure to observe the following
precautions can result in inability to correctly save data and malfunction.
Never use or store the camera and stand in the following locations. Doing so creates
the risk of malfunction of and damage to the camera and stand.
Locations subjected to electrostatic charge
Locations subjected to temperature extremes
(Operating Temperature Range: 5ºC to 35ºC/41ºF
to 95ºF)
Locations where there is extreme moisture
Locations subjected to sudden temperature
changes
Locations where there is a lot of dust
On a shaky, uneven, or otherwise unstable surface
Locations where there is the chance of the
camera getting wet
Locations exposed to direct sunlight
Locations subjected to vibration or impact (Avoid
areas near the engine of a motor vehicle, boat,
etc.)
Near high-voltage power lines, transformers, or
motors (which generate electrical interference that
can cause problems with system operation)
Packing the Equipment into the Carrying Bag
Other Precautions