User manual - YP-100_IN_E

ManualsBrandsCasio ManualsProjectorYP-100

E-1

English

Multifunctional

Presentation Kit YP-100

Getting Started with the Multifunctional Presentation Kit

• Be sure to read the “Safety Precautions” on page E-3 and “Operating Precautions” on page

E-6 before trying to use this product.

• This manual provides a general overview and covers basic operations of the YP-100. For more

information about operations, see the User’s Guide on the bundled CD-ROM.

Contents

Safety Precautions .....................................E-3

Operating Precautions ...............................E-6

Unpacking ...................................................E-6

Introduction.................................................E-7

What you can do with the YP-100 ............E-7

About this manual...................................E-10

General Guide ........................................E-11

Getting Ready ...........................................E-12

Preparing the Remote Controller ............E-12

Replacing the

Remote Controller Battery ......................E-12

Connecting a Projector ...........................E-13

Turning On Power...................................E-14

Installing YP-100 Software .....................E-15

Using the Hold Key.................................E-15

Basic YP-100 Operations.........................E-16

Using a USB Memory Device

with the YP-100 ......................................E-16

Using the YP-100

with a YC-400 Document Camera ..........E-19

Specifications ...........................................E-22

YP100_Guide_E.book 1 ページ２００６年８月８日　火曜日　午後３時１６分

Summary of content (22 pages)

PAGE 1
YP100_Guide_E.book 1 ページ２００６年８月８日火曜日午後３時１６分 Multifunctional Presentation Kit YP-100 Getting Started with the Multifunctional Presentation Kit • Be sure to read the “Safety Precautions” on page E-3 and “Operating Precautions” on page E-6 before trying to use this product. • This manual provides a general overview and covers basic operations of the YP-100. For more information about operations, see the User’s Guide on the bundled CD-ROM. Contents Safety Precautions ....................................
PAGE 2
YP100_Guide_E.book 2 ページ２００６年８月８日火曜日午後３時１６分 • Microsoft, Windows, Windows NT, Windows XP, the Windows logo, and PowerPoint are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • Other company and product names may be registered product names or trademarks of their respective owners. • The contents of this manual are subject to change without notice. • Copying of this manual, either in part or its entirety is forbidden.
PAGE 3
YP100_Guide_E.book 3 ページ２００６年８月８日火曜日午後３時１６分 Safety Precautions Safety Precautions Be sure to read these “Safety Precautions” before trying to use this product. Various symbols are used in this manual and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below.
PAGE 4
YP100_Guide_E.book 4 ページ２００６年８月８日火曜日午後３時１６分 Safety Precautions • Should the electrical cord or plug become damaged, contact your original dealer or authorized CASIO service center. Never touch the AC adaptor while your hands are wet. Water creates the risk of electric shock. Never allow the AC adaptor to become wet. Water creates the risk of fire and electric shock. Never place a vase or any other container of liquid on top of the AC adaptor. Water creates the risk of fire and electric shock.
PAGE 5
YP100_Guide_E.book 5 ページ２００６年８月８日火曜日午後３時１６分 Safety Precautions ● AC adaptor Misuse of the AC adaptor creates the risk of fire and electric shock. Make sure that you always observe the following precautions. • Never cover the AC adaptor with a blanket while it is in use or locate it next to a heater. Such conditions can interfere with heat radiation, and cause heat to build up in the area of the AC adaptor. • Never pull on the power cord when unplugging the AC adaptor. Grasp the plug unit.
PAGE 6
YP100_Guide_E.book 6 ページ２００６年８月８日火曜日午後３時１６分 Operating Precautions Operating Precautions This product is made of precision components. Failure to observe the following precautions can result in inability to correctly save data and malfunction. ● Never use or store the product in the following locations. Doing so creates the risk of malfunction of and damage to the product.
PAGE 7
YP100_Guide_E.book 7 ページ２００６年８月８日火曜日午後３時１６分 Introduction Introduction The YP-100 makes it possible to connect a USB memory device, a wireless LAN, or a document camera to a data projector (CASIO XJ-S30, XJ-360, XJ-460) that is equipped with an RGB input terminal. Once you connect any one of the external USB devices described below to the USB terminal of the YP-100, you can project data from the connected device.
PAGE 8
YP100_Guide_E.book 8 ページ２００６年８月８日火曜日午後３時１６分 Introduction Using a Wireless LAN with the YP-100 Establishing a connection between the YP-100 and a computer over a wireless LAN makes it possible to project the display contents of the computer’s screen from the projector connected to the YP-100. XJ-S30, etc. YP-100 CASIO YW-2 You can have up to four computers connected to the YP-100 over a wireless LAN at the same time.
PAGE 9
YP100_Guide_E.book 9 ページ２００６年８月８日火曜日午後３時１６分 Introduction Using the YC-400 Document Camera with the YP-100 English You can connect a CASIO YC-400 Document Camera to the USB port of the YP-100 and project the images of documents placed on the document stage of the YC-400. XJ-S30, etc. YP-100 YC-400 z For information about basic YC-400 operations, see “Using the YP-100 with a YC-400 Document Camera” on page E-19 of this manual.
PAGE 10
YP100_Guide_E.book 10 ページ２００６年８月８日火曜日午後３時１６分 Introduction About this manual... Terms and Conventions In this manual, there are many procedures that require parallel operations on the YP-100 and your computer. The following are special terms and conventions used in this manual to differentiate between the YP-100 and computer. projection area This is the entire rectangular area that is projected by the projector connected to the YP-100.
PAGE 11
YP100_Guide_E.
PAGE 12
YP100_Guide_E.book 12 ページ２００６年８月８日火曜日午後３時１６分 Getting Ready Getting Ready Preparing the Remote Controller The remote control unit comes loaded with a test battery. Before using it for the first time, remove the battery insulation sheet from the back of the remote controller. z To avoid running down the battery, store the remote control unit so its buttons are not pressed inadvertently.
PAGE 13
YP100_Guide_E.book 13 ページ２００６年８月８日火曜日午後３時１６分 Getting Ready 2. Insert a new battery (CR2025) into the battery holder. 3. English z Make sure that the plus (+) side of the battery is facing upwards (so you can see it). Slide the battery holder back into the remote controller. Connecting a Projector z Make sure that the YP-100 and the projector are both turned off before connecting them.
PAGE 14
YP100_Guide_E.book 14 ページ２００６年８月８日火曜日午後３時１６分 Getting Ready Turning On Power To turn on the YP-100 1. 2. 3. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13). Turn on the projector and/or audio equipment that is connected to the YP-100. Connect the AC adaptor that comes with the YP-100 to the AC adaptor terminal, and plug the AC adaptor into a power outlet. z This will cause the YP-100 to turn on automatically.
PAGE 15
YP100_Guide_E_Body.fm 15 ページ２００６年１０月３日火曜日午後２時４４分 Getting Ready To turn off the YP-100 ] (Power) key to turn off the YP-100. z Any changes you make to setup menu* settings are retained when you press the [ ] (Power) key to turn off the YP-100. Note, however, that setup menu settings are lost if you unplug the AC adaptor from the YP-100 without first pressing the [ ] (Power) key to turn it off.
PAGE 16
YP100_Guide_E.book 16 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations This section explains the following YP-100 operations. z Basic operation for using a USB memory device with the YP-100 You can use the projector connected to the YP-100 to project images from files stored on the USB memory device.
PAGE 17
YP100_Guide_E.book 17 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations 4. Enter “YP-100” and then press the [Enter] key. English z This will create a folder named “YP-100”. 5. Drag the image files to the “YP-100” folder. z This will copy the image files into the folder. z Be sure to copy only JPEG (jpg, jpeg or jpe) or BMP (bmp) format image files into the folder. Other formats are not recognized by the YP-100. 6. On the taskbar, click the (Safely Remove Hardware) icon.
PAGE 18
YP100_Guide_E.book 18 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations 2. 3. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13). 4. Plug the USB memory device you prepared in step 1 into the YP-100’s USB port. 5. Use the remote controller’s cursor keys to move the highlighting to the “YP-100” folder and then press the [ENTER] key. Use the procedure under “Turning On Power” on page E-14 to turn on the YP-100.
PAGE 19
YP100_Guide_E.book 19 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations 1. 2. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13). 3. Connect the document camera to the YP-100 using the USB cable that comes bundled with the document camera. Use the procedure under “Turning On Power” on page E-14 to turn on the YP-100. z This will cause the YP-100’s [POWER] indicator to light green. The YP-100 logo screen also will be projected by the connected projector.
PAGE 20
YP100_Guide_E.book 20 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations 4. With nothing on the document stage, press the [ stand. ] (power) button on the camera z This will turn on the document camera. z The YP-100 will recognize the document camera and start up the YC Camera application automatically. When the YC Camera application starts up, the YP-100 will project an image of the document stage along with a dialog box for adjusting the document camera position.
PAGE 21
YP100_Guide_E.book 21 ページ２００６年８月８日火曜日午後３時１６分 Basic YP-100 Operations 5. Place the document whose image you want to project onto the document camera’s document stage. English z Be sure to place the document in the center of the stage, and do not let any part of the document extend off the edges of the stage. z When placing a landscape orientation document onto the document stage, the top of the page should face towards the camera stand.
PAGE 22
YP100_Guide_E.book 22 ページ２００６年８月８日火曜日午後３時１６分 Specifications Specifications Model Name: YP-100 USB Port: USB TYPE A Audio Out Terminal: Stereo mini jack × 1 RGB Out Terminal: RGB mini D-Sub 15-pin × 1 Operating Temperature: 5 to 35°C (41 to 95°F) Operating Humidity: 20 to 80% (non-condensation) Power Requirements: 100 to 240 V AC, 50/60 Hz Rated Voltage: 5V Power Consumption: 7.5W Dimensions: 65 (W) × 97 (D) × 19.9 (H) (Excluding projections) (2.6" × 3.8" × 0.