User manual - YP-100_IN_E

Getting Ready
E-14
To turn on the YP-100
1. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13).
2. Turn on the projector and/or audio equipment that is connected to the YP-100.
3. Connect the AC adaptor that comes with the YP-100 to the AC adaptor terminal, and
plug the AC adaptor into a power outlet.
z This will cause the YP-100 to turn on automatically.
z This will cause the YP-100’s [POWER] indicator to light green. Also, the YP-100 logo
screen will be projected by the projector if there is nothing connected to the YP-100’s
USB port.
z If this is the first time for you to turn on the YP-100, the dialog box shown below will
appear in the center of the projection area. In this case, advance to the next step below.
4. Use the [T] and [S] keys to move the highlighting to the language you want to
select and then press the [ENTER] key.
z This will select the language you specified and display the logo screen.
Turning On Power
YP100_Guide_E.book 14 ページ ２００６年８月８日 火曜日 午後３時１６分