SDS

Section 15. Regulatory information
None of the components are listed.
Massachusetts
This product does not contain any hazardous ingredients at or above regulated
thresholds.
This product does not contain any hazardous ingredients at or above regulated
thresholds.
Form R - Reporting
requirements
Supplier notification
New Jersey
The following components are listed: MINERAL OIL (UNTREATED and MILDLY
TREATED)
Pennsylvania
None of the components are listed.
State regulations
Other regulations
All components are listed or exempted.
All components are listed or exempted.
At least one component is not listed.
All components are listed or exempted.
All components are listed or exempted.
China inventory (IECSC)
Japan inventory (ENCS)
Korea inventory (KECI)
Philippines inventory
(PICCS)
Australia inventory (AICS)
California Prop. 65
No products were found.
Canada inventory
All components are listed or exempted.
REACH Status
For the REACH status of this product please consult your company contact, as
identified in Section 1.
Section 16. Other information
History
Date of issue/Date of
revision
Date of previous issue
Key to abbreviations
ACGIH = American Conference of Industrial Hygienists
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
CAS Number = Chemical Abstracts Service Registry Number
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
OEL = Occupational Exposure Limit
11/03/2014.
No previous validation.
Hazardous Material Information System (U.S.A.)
1
1
0
0
1
1
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller [phone].
Personal protection
X
Date of issue
11/03/2014.
Page: 8/9
Castrol Transmax Dex/Merc
ENGLISH
(ENGLISH)
Product name
Product code
Version
1
Format
Language
US
467618-US31
(US)