Full Product Manual
Table Of Contents
- Contents
- Overview
- Ring Terminals
- Flag Terminals
- Fork Terminals
- Pin Terminals
- Splice Connectors
- Wire Joints
- Heat-Shrinkable Terminals, Splices, Disconnects
- Disconnects and Male Tabs
- Luminaire Disconnects
- Ferrules
- Wire Termination Tools and Installation Kits
- Wire Termination Technical Information
- Shrink-Kon® Heat-Shrinkable Tubing
- Shrink-Kon® Splice Insulatorsand Insulating Covers
- Shrink-Kon® Installation Tools
- Shield-Kon® Shield Termination System
- Dragon-Tooth® Magnet WireTermination System
www.tnb.com
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
G-46
Wire Termination Technical Information
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
FINISH SUFFIX SPEC. TEMP. RATING
Gold Plate GP MIL-G-45204 Type II, Grade B, C, D, Class O 260˚ C
Nickel Plate NP QQ-N-290 Class 2, Grade G 260˚ C
Plain Finish PF None 150˚ C
Silver Plate SP MIL-T-16366 Type I or II, 400° F, 204° C 150˚ C
Platings/Finish
Electroplated-Tin is standard finish. All others require minimum order quantities and are generally
not stocked. Alternative platings are as follows: Gold, Silver, Tin-Alloys, Nickel or plain finish.
See table (below) for specification information.
Listing
Sta-Kon
®
Rings, Forks and Locking Forks are tested and listed to UL
486A, two-way splices to UL 486C,
disconnects to UL 310 and all appli cable products to CSA 22.2.
Sta-Kon
®
Technical Data
TERMINALS & SPLICES
INSULATION RATING
UL
®
94
FLAMMABILITY VOLTAGE TEMPERATURE
Nylon V-2 600V* 105° C
Vinyl V-0 600V* 105° C
Tefzel
®
V-0 600V* 150° C
Disconnects 300V 105° C
Non-Insulated — 600V 150º C
*1000V fixture or sign
Minimum pull-out test — UL 486A and UL 486C