Full Product Manual

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
G-62
Shrink-Kon
®
Heat-Shrinkable Tubing
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
............................................................................. HSHR Series Specifications ...............................................................................
HSHR Series Heavy-Wall Heat-Shrinkable Tubing
CAT. NO.
MIN.
EXPANDED
I.D. (IN.)
MAX
RECOVERED
I.D. (IN.)
NOMINAL
RECOVERED
WALLED (IN.)
CODE CABLE
SIZE
STANDARD
LENGTH (IN.)
STD.
PKG. QTY.
HSHR750-4 .75 .13 .10 #22–#46 AWG 48 25
HSHR1300-4 1.30 .22 .12 #8 AWG–700 kcmil 48 25
HSHR1750-4 1.75 .29 .13 #4 AWG–1000 kcmil 48 25
HSHR2000-4 2.00 .33 .13 #2 AWG–1250 kcmil 48 25
HSHR2750-4 2.75 .46 .14 1/0 AWG–1500 kcmil 48 15
HSHR3500-4 3.50 .58 .15 3/0 AWG–1750 kcmil 48 10
HSHR4700-4 4.70 .78 .15 300–2000 kcmil 48 5
Order multiple is std. pkg.
Standard color: black.
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Physical
• Tensile Strength ASTM D412, ISO 37 2100 psi (14.5MPa)
• Elongation ASTM D412, ISO 37 600%
• Elongation after Heat Aging ASTM D2671 500%
(168 hrs. at 175° C)
• Heat Shock (4 hrs. at 225° C) ASTM D2671 No cracking or flowing
• Longitudinal Change ASTM D2671 +1%, -10%
• Low-Temperature Flexibility ASTM D2671 No cracking
(4 hrs. at -55° C)
• Specific Gravity ASTM D792 1.10
• Hardness (Shore D) ASTM D2240 50D
Electrical
• Dielectric Strength ASTM D149, IEC 243 500V/Mil (20kV/mm)
• Dielectric Voltage Withstand UL 486D No Breakdown
• Volume Resistivity ASTM D257 1016 ohm-cm
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Chemical
• Fluid Resistance MIL-DTL-23053/15 Good to Excellent
• Fungus Resistance ASTM G21 No Growth
• Copper Corrosion ASTM D2671 No Corrosion
• Water Absorption ASTM D570 0.1%
Adhesive
• Adhesive Lap Sheer ASTM D1002 125 psi (.875 MPa)
(1 in./min. at 23° C)
• Adhesive Softening Point ASTM E28 92° C/-5° C
• Adhesive Peel Strength
(300mm/min. at 23° C)
— to steel, aluminum, P.E.
— PVC
ASTM D1000
35 pli
20 pli
• Adhesive Blocking (30° C) ASTM D1146 No Blocking
• Water Penetration STM 706
No penetration after
236 hrs. of continuous
immersion
6:1 Shrink Ratio
6:1 Shrink Ratio
HSHR Series — High Shrink Ratio
• Accommodates a wide variety of connector shapes
and configurations
• Thermoplastic adhesive liner for complete environmental protection
and insulation
• Continuous operating temperature: -55° C to 110° C
• Shrink temperature: 120° C
• Flame retardant: UL94 – V0