Full Product Manual
Table Of Contents
- Contents
- Overview
- Ring Terminals
- Flag Terminals
- Fork Terminals
- Pin Terminals
- Splice Connectors
- Wire Joints
- Heat-Shrinkable Terminals, Splices, Disconnects
- Disconnects and Male Tabs
- Luminaire Disconnects
- Ferrules
- Wire Termination Tools and Installation Kits
- Wire Termination Technical Information
- Shrink-Kon® Heat-Shrinkable Tubing
- Shrink-Kon® Splice Insulatorsand Insulating Covers
- Shrink-Kon® Installation Tools
- Shield-Kon® Shield Termination System
- Dragon-Tooth® Magnet WireTermination System
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
G-65
Shrink-Kon
®
Heat-Shrinkable Tubing
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
HSB Series — Heat-Shrinkable
Breakout Boots
• Boots for 2-, 3- and 4-way cable breakouts
• Thermoplastic adhesive liner provides
complete environmental protection and insulation
• Meets ESI 09-11
• Strain relief and mechanical protection
• Continuous operating temperature: -55° C to 100° C
• Shrink temperature of 135° C
.............................................................Heat-Shrinkable Breakout Boots Specifications...............................................................
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Physical
• Tensile Strength ASTM D412, IEC 540 2120 psi (14.6 MPa)
• Ultimate Elongation ASTM D412, IEC 540 600%
• Elongation after Heat Aging
(168 hrs. at 175° C)
ASTM D412, IEC 540 520%
• Heat Shock (4 hrs. at 225° C) ASTM D2671
No dripping,
cracking, flowing
• Low-Temperature Flexibility (-55° C) ASTM D2671 No cracking
• Flammability ASTM D630 Self ext. within 1.97"
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Electrical
• Dielectric Strength ASTM D2671 280V/Mil (11kV/mm)
Chemical
• Water Absorption ASTM D570 .03%
HSB Series Heat-Shrinkable Breakout Boots
CAT. NO.
NO.
LEGS
D d L TB TL
APPLICATION
LEGS 600V
CONDUCTOR
AWG/KCMIL
STD.
PKG. QTY.
MIN.
EXPANDED
I.D. (IN.)
MAX
RECOVERED
I.D. (IN.)
EXPANDED
DIA.
(MAX.)
(IN.)
RECOVERED
DIA.
(MAX.)
(IN.)
RECOVERED
LENGTH
(NOM.)
(IN.)
WALL
THICKNESS
OF BODY
(NOM.)
(IN.)
WALL
THICKNESS
OF LEG
(NOM.)
(IN.)
HSB200-75-2 2 1.97 .83 .90 .20 4.69 .13 .13 #3–300 10
HSB120-50-3 3 1.50 .65 .50 .16 4.47 .11 .11 #8–3/0 10
HSB170-82-3 3 2.20 1.20 .89 .35 7.09 .12 .12 #1–600 10
HSB240-112-3 3 2.83 1.46 1.38 .69 7.01 .16 .12 300–1000 10
HSB125-50-4 4 1.38 .59 .47 .12 3.74 .10 .08 #12–2/0 10
HSB175-82-4 4 2.36 1.18 .90 .25 7.95 .16 .13 #4–600 10
HSB265-120-4 4 3.10 1.50 1.40 .49 9.45 .13 .13 3/0–1000 10
HSB350-138-3 3 3.54 1.38 1.34 .55 7.87 .12 .08 4/0–1000 5
HSB430-157-3 3 4.33 1.57 1.38 .69 7.01 .16 .12 300–1000 5
HSB490-200-3 3 4.92 2.00 2.32 1.00 11.14 .15 .15 750–1000 5
HSB520-135-4 4 5.25 1.35 3.00 .55 10.02 .13 .16 4/0–1000 5
Order multiple is std. pkg.
TB
TL
D
L
D
Wall Thickness
of Body
Wall Thickness
of Leg