Full Product Manual

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
G-66
Shrink-Kon
®
Heat-Shrinkable Tubing
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
3:1 Shrink Ratio
3:1 Shrink Ratio
HSMW Series — Medium-Wall Tubing
• More flexible than heavy-wall products
• Seals and protects cable splices and terminations
• High resistance to impact and abrasion
• Shrink temperature of 120° C
• Continuous operating temperature: -55° C to 110° C
• Thermoplastic adhesive liner guarantees complete
environmental protection and insulation
............................................................................ HSMW Series Specifications ..............................................................................
HSMW Series Medium-Wall Heat-Shrinkable Tubing
CAT. NO.
MIN.
EXPANDED
I.D. (IN.)
MAX
RECOVERED
I.D. (IN.)
NOMINAL
RECOVERED
WALLED
(IN.)
CODE CABLE
SIZE
STANDARD
LENGTH (IN.)
STD.
PKG. QTY.
HSMW400-48 .40 .15 .080 #4–#14 AWG 48 25
HSMW750-48 .75 .22 .080 4/0–#8 AWG 48 25
HSMW1100-48 1.10 .40 .095 400 kcmil–#1 AWG 48 25
HSMW1300-48 1.30 .40 .095 600 kcmil–#1 AWG 48 25
HSMW1500-48 1.50 .50 .095 750 kcmil–3/0 AWG 48 25
HSMW1700-48 1.70 .50 .100 1000 kcmil–2/0 AWG 48 25
HSMW2050-48 2.05 .75 .100 250 –600 kcmil 48 25
HSMW2750-48 2.75 1.00 .100 500–1000 kcmil 48 15
HSMW3500-48 3.50 1.18 .100 750–1250 kcmil 48 10
HSMW4700-48 4.70 1.57 .110 1500–2500 kcmil 48 5
HSMW6700-48 6.70 2.30 .120 — 48 5
HSMW9000-48 9.00 3.00 .130 — 48 5
Order multiple is std. pkg.
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Physical
• Tensile Strength ASTM D412, ISO 37 2100 psi (14.5MPa)
• Elongation ASTM D412, ISO 37 550%
• Longitudinal Change ASTM D2671 +1%, -10%
• Specific Gravity ASTM D792, ISO/R1183 1.1
• Elongation after Heat Aging
(168 hrs. at 150° C)
ASTM D2671, ISO 37 500%
• Heat Shock (4 hrs. at 225° C) ASTM D2671 No Cracking or Flowing
• Low-Temperature Flexibility
(4 hrs. at -55° C)
ASTM D2671 No Cracking
• Hardness (Shore D) ASTM D2240 50D
Electrical
• Dielectric Strength ASTM D149, IEC 243 500V/Mil (20kV/mm)
• Dielectric Voltage Withstand
(2500V, 60 Hz, 1 Min.)
UL 486D No Breakdown
• Volume Resistivity ASTM D257 10
16
ohm-cm
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Chemical
• Fluid Resistance MIL-DTL-23053/5,
ISO 1817, ISO 37
Good to Excellent
• Copper Corrosion ASTM D2671 No Corrosion
• Fungus Resistance ASTM G21 No Growth
• Water Absorption ASTM D570 .1%
Adhesive
• Adhesive Lap Sheer
(1 in./min. at 23° C)
ASTM D1002 (mod) 125 psi (.875 MPa)
• Adhesive Softening Point ASTM E28 92° C/-5° C
• Adhesive Peel Strength
(300mm/min. at 23° C)
— to steel, aluminum, P.E.
— PVC
ASTM D1000
35 pli
20 pli
• Adhesive Blocking (30° C) ASTM D1146 No Blocking
• Water Penetration STM 706 No penetration after
286 hrs. of continuous
immersion