Full Product Manual

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
G-68
Shrink-Kon
®
Heat-Shrinkable Tubing
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
Example 1
If a bulk length of tubing is 1,000' and the desired
length of each individual piece is 6", the minimum
order requirement is 2,000 pieces.
Given (length of reel)........................................1,000'
Convert to inches by multiplying by 12.......12 x 1,000
Length of reel in inches ...............................= 12,000
Divide by desired length............................12,000 ÷ 6
Total number of 6" pieces
in a 1,000' reel (Minimum Order)................= 2,000
Example 2
If a bulk reel of tubing is 400' and the desired length
of each individual piece is 2", the minimum order
requirement is 2,400 pieces.
Given (length of reel)...........................................400'
Convert to inches by multiplying by 12..........12 x 400
Length of reel in inches .................................= 4,800
Divide by desired length.............................4,800 ÷ 2
Total number of 2" pieces
in a 400' reel (Minimum Order)...................= 2,400
Contact tech services for pricing and availability on cut pieces.
Custom-Cut Length of Bulk
Packaging — Thin-Wall Tubing
To best meet your requirements for thin-wall heat-shrinkable tubing, Thomas & Betts
welcomes the opportunity to cut bulk reels of tubing. Minimum order requirement is
one standard bulk reel, and multiples thereof. See table for bulk reel length by size.
Tubing cannot be cut smaller than
1
⁄2".
When ordering custom-cut lengths of tubing, order by piece, not by length.
To determine the minimum number of pieces to order, simply figure how many
pieces of a specific length of tubing are required to make use of a complete bulk
reel. See examples to convert bulk reels to cut pieces.
Custom order lengths for those special jobs!
SERIES
BULK REEL
LENGTH (FT.)
SERIES
BULK REEL
LENGTH (FT.)
CPO63 =
1
⁄16" 1,000 CPO375 =
3
⁄8" 500
CPO93 =
3
⁄32" 1,000 CPO500 =
1
⁄2" 400
CPO125 =
1
⁄8" 1,000 CPO750 =
3
⁄4" 300
CPO187 =
3
⁄16" 1,000 CPO1000 = 1" 300
CPO250 =
1
⁄4" 1,000
Minimum order quantity for cut pieces.
THINWALL
SERIES
CUT PIECE CATALOG NO. CONSTRUCTION
MINIMUM
EXPANDED I.D. (IN.) COLOR
LENGTH
(IN.)
CPO = 63 = .063 0 = Black XXXX — 4 digits specify
93 = .093 C = Clear length of cut in inches
125 = .125 2 = Red
187 = .187 4 = Yellow
250 = .250 5 = Green
375 = .375 6 = Blue
8 = Gray
500 = .500 9 = White
750 = .750 S = Green & Yellow Striped*
1,000 = 1.000
Example: CPO + 125 + 2 + 1.500 = CPO125-2-1.500
CPO Thinwall Shrink, size 125 (.125"), red color, 1.5" long
*Contact customer service for bulk reel quantity.
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Physical
• Tensile Strength ASTM D2671, ISO 37 2,200 psi (15.0 MPa)
• Elongation ASTM D2671, ISO 37 400%
• Longitudinal Change ASTM D2671 +1%, -10%
• 2% Secan Modulus ASTM D2671 16,000 psi (110 MPa)
• Specific Gravity ASTM D792, ISO/R1183 1.3" (colors) .95" (clear)
• Restricted Shrinkage ASTM D2671 No Cracking
• Elongation after Heat Aging
(168 hrs. at 175° C)
ASTM D2671 350%
• Heat Shock (4 hrs. at 250° C) ASTM D2671 No Cracking or Flowing
• Low-Temperature Flexibility
(4 hrs. at -55° C
ASTM D2671 No Cracking or Splitting
• Flammability ASTM D2671 Flame Retardant (except Clear)
Electrical
• Dielectric Strength ASTM D2671, IEC 243 600V/Mil (24kV/mm)
• Volume Resistivity ASTM D2671 1016 O HM-CM
Chemical
• Fluid Resistance MIL-DTL-23053/5, ISO 1817, ISO 37 Good to Excellent
• Copper Corrosion ASTM D2671 No Corrosion
• Water Absorption ASTM D570 .2%
• Fungus Resistance ASTM G21 No Growth
................................. Thin-Wall Tubing Specifications .....................................
2:1 Shrink Ratio
2:1 Shrink Ratio