Full Product Manual

United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
G-79
Shield-Kon
®
Shield Termination System
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
This solderless, wraparound connector terminates shielded cable in
seconds... with uniform precision. It’s particularly well suited for production
work in aircraft, aerospace and electronic industries where size and weight
are important.
Once crimped, it provides a compact, lightweight, low-resistance,
high-strength connection, which meets and exceeds the performance
requirements of MIL-F-21608.
The connector works equally well on braided, wrapped or foil shields and
has the added advantage of being able to be used as a mid-span termination.
Only four sizes, which can be easily identified by the color of their insulation,
are needed to cover a range of shielding diameters from .05" to .3".
• Compact, low-profile connector
• One piece wraparound design
• Tough polyester insulation (Mylar
®
type)
• Inventory savings: only four sizes
• Transparent insulation, easily inspected
• MIL-specified, industry-approved technology
• No heat or power required to install
• No damage to inner conductor
• Less installation time required
• Uniform, precise connection every time
• Low installed cost
• Mid-span termination possible, eliminating
the need to demount a cable already installed
Terminate shielded cable in
seconds without heat or power!
The one-piece Shield-Kon
®
connectors meet the MIL-F-21608 standards
for the following environmental specifications:
• Voltage Drop: 9 mV max. at 1A after environmental exposure
• Insulation Dielectric Strength: 500 VRMS at 60 Hz for 1 minute
• Corrosion Resistance: 48 hours in 5% salt fog
• Pullout Strength: 15 lbs. min. for #22 AWG, and 19 lbs. min. for #20 AWG
• Vibration: .03" double amplitude between 10 and 55 Hz
for 6 hours on each of two axis
• Material: Copper, conform to CDA No. 110
• Plating: Tin, electro-plated (thickness 3 to 8 µm), in accordance
with MIL-T-10727A
• Insulation: Polyester film (Mylar
®
type), color coded for size identification
• Temperature: -85° F to +257° F (-65° C to +125° C)
.................................... Specifications ...................................
.59" – .64"
.11"
.11"
Ground wire trap
Insulation
In addition, hypot tests have shown that the cable manufacturers’ specified
working voltage rating is maintained after the installation of Shield-Kon
®
RSK
connectors. It is, however, still advisable to evaluate the suitability of these
connectors and verify their performance for the particular application.