Full Product Manual

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
G-90
Shield-Kon
®
Shield Termination System
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
Two-Piece Connectors for Multiple
Conductor Shielded Cable
Connector and Die Selection in the Circular Range
The choice of the appropriate combination of inner ring, outer ring and crimp
tool/die depends on the overall diameter of the inner conductors (underneath
the shield).
In the case of the Circular range, there is a direct correlation between the
diameter of the inner conductors and the inner and outer rings. With the
directions (shown below), a measuring instrument (caliper) is all that is
required to make the right selection.
Selection of the GSB Inner Ring
• Measure the maximum value of the overall diameter of the
inner conductors (underneath the flattened shield) by gently
rotating the cable. When doing so, it should be possible to
turn the cable easily between the jaws of the caliper.
• Add .060" to the measured value. The sum will give
the Inner Diameter (I.D.) of the GSB inner ring.
• In the table, select the GSB inner ring having this I.D.
or the nearest larger I.D.
Selection of the GSC Outer Ring and of the Die
Once the appropriate GSB inner ring is found, the table
(below) immediately gives the corresponding GSC outer ring
and the appropriate die for the 13640 Hydraulic Head.
Connectors come full circle with circular connectors!
CAT. NO.
COLOR
CODE
I.D.
(IN.)
O.D.
(IN.)
STD.
PKG.
Inner Sleeves
GSB430 Red .430 .500 50
GSB550 Blue .550 .620 50
GSB670 Gray .670 .750
50
GSB810 Brown .810 .880 50
GSB920 Green .920 1.000
50
GSB1040 Pink 1.040 1.120 50
GSB1353 Yellow 1.353 1.423
50
GSB1425 Red 1.425 1.545 50
Order multiple is std. pkg.
CAT. NO.
COLOR
CODE
I.D.
(IN.)
O.D.
(IN.)
DIES NOS. FOR
1340
STD.
PKG.
Outer Ring
GSC590 Red .590 .670 GS590 50
GSC710 Blue .710 .790 GS710 50
GSC840 Gray .840 .920 GS840 50
GSC1010 Brown 1.010 1.090 GS1010 50
GSC1130 Green 1.130 1.210 GS1130 50
GSC1250 Pink 1.250 1.330 GS1250 50
GSC1440 Purple 1.440 1.520 GS1440 50
GSC1563 Yellow 1.563 1.643 GS1563 50
GSC1670 Red 1.670 1.750 GS1670 5
Order multiple is std. pkg.
Inner Sleeve
• Material: Copper alloy ASTM B135
• Finish: Electro tin-plated
(per MIL-T-10727A)
Outer Sleeve
• Material: Copper ASTM B188
• Finish: Electro tin-plated
(per MIL-T-10727A)
.................................... Specifications ...................................