User manual

Cat

S30 Smartphone User Manual

3. Put the nano SIM card(s) in the SIM tray as indicated on the tray guide.

4. Insert the SIM tray into the SIM card slot.

Note:

∙ Put the nano SIM card(s) in the SIM tray, with the card(s) gold contacts facing up, push the tray all

the way until you hear a locking sound.

∙ To remove the nano SIM card(s), press the tray inwards and release quickly and pull the tray out to

remove. Then remove the nano SIM card(s).

Charging the Battery

The S30 has an embedded battery, to charge the battery:

1. Connect the USB cable that came with your mobile phone to the charger.

Note:

Use only Cat

approved chargers and cables. Unapproved equipment may cause damage to the

device or cause batteries to explode.

2. Open the USB port cover. Connect the USB cable to the USB port of your phone.

Note:

Be careful not to use excessive force when plugging the USB cable.

Be aware of the correct orientation of the plug. Damage can be caused by attempting to insert the

connector incorrectly, this is not covered by the warranty.

3. Connect the USB to the appropriate AC mains plug and connect safely to the mains power

supply.

4. When charging is complete, remove the connector from the device and then remove the wall

charger.

Note:

If the battery is completely discharged, it may take a few minutes before the charging icon appears.