Product Manual

Caterpillar: Confidential Green

Battery Connection

The generator is equipped with an internal lithium-ion battery mounted in the battery holder. The battery is

disconnected and must be connected before first use.

To access the battery:

1. Unscrew the 2 fasteners (1) at the top of the side panel. Note that they are captive fasteners and cannot be

removed from the side panel.

2. Pull the captive fasteners in the direction shown (2) to release the top of the side panel.

3. Pull the panel until the hidden fasteners (3) are pulled apart.

Important, stop pulling once the fasteners (3) are pulled apart, otherwise the tabs at the bottom on the side panel

could be damaged.

4. To remove the side panel completely, lift off in a vertical direction (4) to release the bottom tabs.

To connect the battery:

1. The positive battery cable (5) is already connected.

2. Attach the cable with the black cap to the negative battery terminal (6).

3. To make the connection easier, the battery can be removed by releasing the rubber battery strap.

Reattach the side panel in reverse order before first use.

Walk-Around Inspection

Perform the Walk-Around Inspection before each use as described later in this manual.