Product Manual

6
Caterpillar: Confidential Green
Electrocution
Shock/Electrocution Hazard: Do not operate this
equipment or work on this equipment unless you
have read and understand the instructions and
warnings in the Owner’s Manual. Failure to
follow the instructions or heed the warnings will
result in serious injury or death.
Operation of this equipment may create sparks
that can start fires around dry vegetation. A spark
arrestor may be required. The operator should
contact local fire agencies for laws or regulations
relating to fire prevention requirements.
Electrical backfeed into a utility’s distribution system
can cause property damage, severe injury, or death.
Electrical backfeed warning. Do not connect
generator to a building’s electrical system unless
using an isolation (transfer) switch installed by a
certified, licensed electrician. CA H&S Code
119075 & 119080.
Additional Messages
Do not operate in wet conditions
No smoking, no exposed flames,
no sparks.
Maintain a minimum distance of 5
feet (1.5 meters) from other
objects.
Ensure that the unit is properly
grounded.
Earth ground connection
Special Requirements
Electrical equipment, including lines and plug
connections should be covered and protected from
moisture.
In any generator set installation, the frame of the
generator must be connected to an earth ground. A
ground terminal is provided.
The INV4000 E has a permanent neutral conductor
bonded to the frame.
For 120VAC, use extension cords rated for 125V at
20A or greater. Use the shortest extension cord that
meets these requirements.
• Wear a hard hat, protective glasses, and other
protective equipment, as required.
• When work is performed around an engine that
is operating, wear protective devices for ears in
order to help prevent hearing damage.
• Do not wear loose clothing or jewelry that can
snag on controls or on other engine parts.
• Ensure that all protective guards and all covers
are secured in place on the engine.
• Never put maintenance fluids into glass
containers. Glass containers can break.
• Use all cleaning solutions with care.
The circuit breakers should match the generator
specifications. If the circuit breakers require
replacement, they must be replaced with a circuit
breaker of the same rating and performance
characteristics.