Operation Manual

ENG-11

ENG

Continue

Preparing the computer

Computer's basic items must be set up before using it.

Removing the insulation sheet

When using the unit for the ﬁrst time after pur-

chasing, open the battery cover and remove

the insulation sheet.

* After you remove the insulation sheet, re-

place the battery cover in place.

Formatting operation

The formatting operation is performed at initial purchase, or to reset all to default.

Caution: All data are reset to the default and deleted.

While pressing the MENU button on the back of the com-

puter, press AC button.

Release the MENU button when a test pattern is displayed on

the screen. The date/clock setting screen appears.

Continue with “Date/Clock setting”.

Formatting operation:

* When all screen items light up without any test pattern displayed on the

screen, the formatting operation has not been completed properly. Perform

the formatting operation again.

* The restarting operation is performed after you replace batteries, or when an

error is displayed.

Restarting operation

Press the AC button on the back of the computer.

After all screen items light up for a second, the date/clock

setting screen appears.

Continue with “Date/Clock setting”.

Restarting operation:

* See “Formatting/Restarting operation” (page 16) for dif-

ferences between the formatting and restarting operations.

Insulation

sheet

Open

After a test pattern is

displayed, all screen

items light up.

All screen items light

up (for a second).