Operation Manual

ENG-12
2
Date/Clock setting
Set the current date and time.
1. Select the date display format.
Select the date display format from “YY/MM/DD”, “MM/
DD/YY”, and “DD/MM/YY” using the M1/+ and M2/- but-
tons, and confirm with the SSE button.
Switch the display:
M2/-
M1/+
(or)
Confirm:
SSE
2. Enter the “Year”, “Month” and “Day”.
Enter the “Year”, “Month” and “Day” in the display order
selected in Step 1 using the M1/+ and M2/- buttons, and con-
firm with the SSE button. Enter the last 2 digits of the year.
Setting range: 00.01.01 – 99.12.31
Increase/decrease:
M2/-
M1/+
(or)
Confirm:
SSE
3. Select the clock display format.
Select “24h (24 hour)” or “12h (12 hour)” using the M1/+
and M2/- buttons, and confirm with the SSE button.
24h
↔
12h:
M2/-
M1/+
(or)
Confirm:
SSE
4. Enter the “Hour” and “Minute”.
Enter the “Hour” using the M1/+ and M2/- buttons, con-
firm with the SSE button, and then enter the “Minute” in
the same way.
Setting range: 24h 0:00 – 23:59 [12h AM1:00 – PM12:59]
Increase/decrease:
M2/-
M1/+
(or)
Confirm:
SSE
5. After you set the date/clock, press the MENU button to
proceed to the “Tire circumference input”.
To the “Tire circumference input” :
MENU
(Back)
* For the restarting operation, the computer completes the setup, and changes
to the measurement screen.
Hour Minute
Display format
YY/MM/DD