Operation Manual

ENG-14

Selecting speed unit

Select the speed unit from “km” and “mile”.

1. Select the speed unit.

↔

mile:

M2/-

M1/+

(or)

2. After selecting, press the MENU button. The measurement

screen appears and the computer set-up is completed.

To the measurement screen:

(Back)

Operation test

Test the functioning of the speed sensor (SPEED, CADENCE) and the heart rate

sensor.

* After you change to the measurement screen, it may take up to more than a

dozen seconds to display the measurement data since the computer checks the

sensor ID.

* When or is turned off, press the M1/+ or M2/- button to turn the icon on.

Speed sensor (SPEED)

1. Raise the rear wheel and spin the wheel.

2. When the speed is displayed on the

screen, it is operating normally.

Speed sensor (CADENCE)

1. Turn the crank.

2. When the cadence is displayed on the

screen, it is operating normally.

Heart rate sensor

1. Wear the heart rate sensor (page 10).

2. When the heart rate is displayed on the

screen, it is operating normally.

* Even if the heart rate sensor is not worn, a

heart rate signal is transmitted by rubbing

the electrode pads on both sides with your

thumbs. This method cannot be used to

measure the heart rate accurately, but used

as a simple method for testing the sensor/

computer communication.

Electrode pad