Operation Manual

ENG-23
ENG
M2/-
M2/-
TM
Start of
measurement
Lap time 1
Split time 1
Split time 2
Lap time 2
LAP LAP
Continue
Saving the lap
The recorded lap data is saved to a file when you perform the resetting operation
(page 19), and can be viewed on the menu screen “File view” (page 26).
* Pressing the LAP button while the total number of laps reaches 99 displays the
lap data, but “--” appears in place of the lap number indicating further record-
ing is impossible.
* One lap per file is used even when there is no lap data. Therefore, the total
number of laps is the sum of the total number of laps in all files and the num-
ber of files.
Example) When the following number of laps are recorded in the files:
Number of laps in a file Number of files
F01 : 5 laps
3 filesF02 : 0 lap
F03 : 10 laps
The total number of laps is the sum of the total number of used laps in all the
files “15” and the total number of files “3”, i.e., “18”.
Lap time and split time
The lap time displays elapsed time from the
last press of the LAP button.
The split time displays the elapsed time from
the start of measurement to the point LAP
button is pressed.
Advance use of the real time lap data
For the real time lap data indicated in the
lower display, the computer starts/stops the
measurement in sync with the regular mea-
surement; however, it resets and restarts the
data every time you press the LAP button.
This independent feature of lap time can be
useful also for intervals and sectional trials
such as hill climb section.
Lap time
(2 Sec.)
Lap distance