Operation Manual

ENG-30
M2/- M1/+
Setting the clock/date
Set the “Clock display format”, “Hour”, “Minute”, “Date display format”, “Year”,
“Month” and “Day”.
* Press and hold the M1/+ or M2/- button to increase/decrease the number
quickly.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the CLOCK.DATE screen using the M1/+ and
M2/- buttons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Select the clock display format.
Select “24h (24 hour)” or “12h (12 hour)” using the M1/+
and M2/- buttons, and confirm with the SSE button.
24h
↔
12h:
M2/-
M1/+
(or)
Confirm:
SSE
3. Enter the “Hour” or “Minute”.
Enter the “Hour” using the M1/+ and M2/- buttons,
confirm with the SSE button, and then enter the “Minute”
in the same way.
Setting range: 24h 0:00 – 23:59 [12h AM1:00 – PM12:59]
Increase/decrease:
M2/-
M1/+
(or)
Confirm:
SSE
4. Select the date display format.
Select the date display format from “YY/MM/DD”, “MM/
DD/YY”, and “DD/MM/YY” using the M1/+ and M2/- but-
tons, and confirm with the SSE button.
Switch the display:
M2/-
M1/+
(or)
Confirm:
SSE
5. Enter the “Year”, “Month” and “Day”.
Enter the “Year”, “Month” and “Day” in the display order
selected in Step 4 using the M1/+ and M2/- buttons, and
confirm with the SSE button. Enter the last 2 digits of the
year.
Setting range: 00.01.01 – 99.12.31
Increase/decrease:
M2/-
M1/+
(or)
Confirm:
SSE
Hour Minute
Display format