Operation Manual

ENG-31
ENG
M2/- M1/+
Continue
6. Pressing the MENU button returns to the menu top
screen (CLOCK.DATE screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Setting the tire circumference
Set the tire circumference to SP1 (Speed sensor 1) and SP2 (Speed sensor 2)
synchronized according to “Searching the sensor ID” (page 32).
* For the tire circumference, see “Tire circumference” (page 13).
* Press and hold the M1/+ or M2/- button to increase/decrease the number quickly.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the TIRE screen using the M1/+ and M2/- but-
tons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Select “ID:1” (Sensor 1) or “ID:2” (Sensor 2) using the
M1/+ and M2/-buttons.
ID:1
↔
ID:2 :
M2/-
M1/+
(or)
Confirm:
SSE
At this point if entry of tire circumference is not neces-
sary, proceed to Step 4.
3. Enter the last 2 digits of the tire circumference for the
sensor selected in Step 2 using the M1/+ and M2/- but-
tons, and confirm using the SSE button.
Then, enter the first 2 digits in the same way.
Setting range: 0100 – 3999 mm
Increase/decrease:
M2/-
M1/+
(or)
Move digits:
SSE
4. Pressing the MENU button returns to the menu top
screen (TIRE screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Current wheel
size
Sensor icon be-
ing recognized