Operation Manual

ENG-34
M2/- M1/+
Setting the measurement unit
Change the unit (km or mile).
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the UNIT screen using the M1/+ and M2/- but-
tons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Select the speed unit using the M1/+ and M2/- buttons.
km
↔
mile:
M2/-
M1/+
(or)
3. Pressing the MENU button returns to the menu top
screen (UNIT screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
* After the unit is switched, the total distance measured in the past is automati-
cally converted to the new unit.
Total distance manual entry
Once you enter any value to the total distance, you can start the total distance
from the value you entered. The total distance in the past can be input after for-
matting or to a new computer.
* Press and hold the M1/+ or M2/- button to increase/decrease the number
quickly.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the ODO INPUT screen using the M1/+ and
M2/- buttons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
Current speed
unit
Current
total value