Operation Manual

ENG-35
ENG
M2/- M1/+
Continue
2. Enter the total distance using the M1/+ and M2/- buttons,
and move digits using the SSE button.
* The total distance is displayed in a 6-digit integer num-
ber, beginning with 4 digit display and including small
letters sequentially shifting to the right.
Setting range: 0 – 999999 km [mile]
Increase/decrease:
M2/-
M1/+
(or)
Move digits:
SSE
3. Pressing the MENU button returns to the menu top
screen (ODO INPUT screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Setting the auto-mode
Switch on/off of the auto-mode (page 18).
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the AUTO MODE screen using the M1/+ and
M2/- buttons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Select ON or OFF using the M1/+ and M2/- buttons.
ON
↔
OFF:
M2/-
M1/+
(or)
3. Pressing the MENU button returns to the menu top
screen (AUTO MODE screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Last 4 digits are
displayed.
Current setting