Operation Manual
ENG-36
M2/- M1/+
Setting the countdown distance
Enter the target trip distance for the countdown distance (page 24).
* Press and hold the M1/+ or M2/- button to increase/decrease the number
quickly.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the C.D.DST
→
screen using the M1/+ and
M2/- buttons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Enter the target distance using the M1/+ and M2/- but-
tons, and move digits using the SSE button.
Setting range: 0.0 – 9999.9
Increase/decrease:
M2/-
M1/+
(or)
Move digits:
SSE
* The target distance can be set to the 0.1 km.
3. Pressing the MENU button returns to the menu top
screen (C.D.DST
→
screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Current setting
Target distance
In case of 100.0
km