Operation Manual

ENG-37
ENG
M2/- M1/+
Continue
Setting sound
Switch on/off of the target zone alarm sound and button operation sound.
1. Press the MENU button in the measurement screen to
switch to the menu top screen.
Switch to the SOUND screen using the M1/+ and M2/-
buttons, and confirm with the SSE button.
Menu top:
MENU
(Back)
Changing the menu:
M2/-
M1/+
(or)
Confirm:
SSE
2. Switch between the HR out of zone alarm and button
operation using the SSE button.
HR.ALARM
↔
BUTTON:
SSE
3. Select ON or OFF using the M1/+ and M2/- buttons.
ON
↔
OFF:
M2/-
M1/+
(or)
4. Pressing the MENU button returns to the menu top
screen (SOUND screen), and confirm the change(s).
Pressing it again returns to the measurement screen.
To the menu top/measurement screen:
MENU
(Back)
Setting the target heart rate zone
Select the HR target zone (1 to 4) or OFF, and change the upper/lower limit of
each zone.
* Stop measurement and perform the resetting operation (page 19) before
you can change the target heart rate zone. Unless you perform the resetting
operation, “DATA RESET” appears on the screen, preventing from changing
the target heart rate zones.
* For details of the target zone, see “3 Use of the target zone” (page 41).
* Press and hold the M1/+ or M2/- button to increase/decrease the number
quickly.
HR zone alarm
Button opera-
tion sound