Operation Manual

ENG-7
ENG
Continue
How to install the unit on your bicycle
When attaching the FlexTight™ bracket to the handlebar
* Attach the bracket with its open end facing to the right.
Cut the excess length of the band using scissors.
Caution:
Round off the cut edge of the bracket band to prevent injury.
Cut
Bracket
Bracket band Bracket rubber pad Stem
Dial
Dial
Bracket
Bracket band Bracket rubber pad Handlebar
1
Attach the bracket to the stem or handlebar
The FlexTight™ bracket can be attached to either the stem or the handlebar, de-
pending on how the bracket fits into the bracket band.
Caution:
Tighten the dial on the bracket band by hand only.
Over-tightening can damage the screw threads.
When attaching the FlexTight™ bracket to the stem
* Attach the bracket with its open end facing to the right.