Speed sensor SPD-30 1. Before use: Battery replacement 2. Pairing 3. How to install the unit on your bicycle Handling and Support Copyright© 2020 CATEYE Co,.Ltd.
SPD-30 1. Before use: Battery replacement Warning!!! • Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. • If the battery compartment does not close securely, stop using the product and keep it away from children.
Open Close Battery cover Battery replacement Important When using this sensor with a CATEYE computer, the speed display will flash when it is time to replace the battery. Change the sensor’s battery if the computer’s current speed display starts flashing. Copyright© 2020 CATEYE Co,.Ltd.
SPD-30 1. Before use: Battery replacement 2. Pairing Important This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app. To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual. The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.
2. Shake the sensor, or rotate the tire where it is mounted to transmit the signal. When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone. Tap [Pair to Device]. The verified sensor (CATEYE SPD-30) is displayed under [Device] and pairing is completed. * When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (SPD). 3. Set the tire circumference to the sensor.
SPD-30 1. Before use: Battery replacement 2. Pairing 3. How to install the unit on your bicycle This sensor can measure speed just by installing the sensor to the hub spindle of the bicycle. The sensor can be installed to either the front or rear wheel. 1. Attach the rubber pad to the sensor.
2. Install the sensor to the hub spindle of the wheel. Rubber band Warning!!! Check periodically to ensure that the unit is attached securely. Do not use a damaged rubber band. * The nylon ties can be used for holding in place more securely. Copyright© 2020 CATEYE Co,.Ltd.
Handling and Support Speed sensor SPD-30 Warning!!! / Caution! Warning!!! • If a battery is swallowed accidentally, consult a doctor immediately. • Check periodically to ensure that the unit is attached securely. Do not use a damaged rubber band. Specifications Batteries used Lithium battery (CR2032) x1 Battery life Approx. 10 months (If used for 1 hour a day.) * As the included battery is for monitor use, battery life may be shorter than that indicated above.
Maintenance If sensor unit or accessories become dirty, clean with a soft cloth moistened with mild detergent, and then wipe with a dry cloth. Never apply paint thinner, benzine or alcohol; damage will result. Product warranty 2-year guarantee Sensor unit (Accessories and battery consumption excluded) CatEye cycle computers are warranted to be free of defects from materials and workmanship for a period of two years from original purchase.
Detail on how to determine the tire circumference To determine tire circumference (L) with more accuracy, measure the tire using the method below. * When using “Cateye Cycling™” smartphone app, you can simply select the size indicated on the tire. Measure actual tire circumference (L) With tire air pressure adjusted appropriately, apply a load to the bicycle. Using the valve, etc., as a marker, rotate the tire once and measure the distance traveled along the ground.
Cadence sensor CDC-30 1. Before use: Battery replacement 2. Pairing 3. How to install the unit on your bicycle Handling and Support Copyright© 2020 CATEYE Co,.Ltd.
CDC-30 1. Before use: Battery replacement Warning!!! • Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. • If the battery compartment does not close securely, stop using the product and keep it away from children.
Open Close Battery cover Battery replacement Important When using this sensor with a CATEYE computer, the cadence display will flash when it is time to replace the battery. Change the sensor’s battery if the computer’s cadence display starts flashing. Copyright© 2020 CATEYE Co,.Ltd.
CDC-30 1. Before use: Battery replacement 2. Pairing Important This section explains how to pair the smart computer and the sensor using the “Cateye Cycling™” smartphone app. To pair the sensor directly to the computer without a smartphone, refer to your computer’s online manual or instruction manual. The Cateye Cycling™ smartphone app (free) must be installed on the smartphone to be used in advance.
Tap [Pair to Device] to start pairing. 2. Shake the sensor, or rotate the crank where it is mounted to transmit the signal. When Cateye Cycling™ detects the sensor signal, a message will be displayed on the smartphone. Tap [Pair to Device]. The verified sensor (CATEYE CDC-30) is displayed under [Device] and pairing is completed. * When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor name (CDC).
CDC-30 1. Before use: Battery replacement 2. Pairing 3. How to install the unit on your bicycle This sensor can measure cadence just by installing the sensor to the crank of the bicycle. 1. Attach the rubber pad to the sensor.
2. Install the sensor to the crank. When the sensor is installed on the left crank (inside) Rubber band * In order to protect the rubber band from being damaged by the rider's shoes, the sensor should be installed as close as possible to the crank shaft. Warning!!! Check periodically to ensure that the unit is attached securely. Do not use a damaged rubber band. * The nylon ties can be used for holding in place more securely. Copyright© 2020 CATEYE Co,.Ltd.
Handling and Support Cadence sensor CDC-30 Warning!!! / Caution! Warning!!! • If a battery is swallowed accidentally, consult a doctor immediately. • Check periodically to ensure that the unit is attached securely. Do not use a damaged rubber band. Specifications Batteries used Lithium battery (CR2032) x1 Battery life Approx. 10 months (If used for 1 hour a day.) * As the included battery is for monitor use, battery life may be shorter than that indicated above.
Maintenance If sensor unit or accessories become dirty, clean with a soft cloth moistened with mild detergent, and then wipe with a dry cloth. Never apply paint thinner, benzine or alcohol; damage will result. Product warranty 2-year guarantee Sensor unit (Accessories and battery consumption excluded) CatEye cycle computers are warranted to be free of defects from materials and workmanship for a period of two years from original purchase.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada Statement This device complies with Industry Canada licence‐exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
