How-To Guide

Table Of Contents

Tap [Pair to Device] to start pairing.

2. Shake the sensor, or rotate the crank where it is mounted to transmit the

signal.

When Cateye Cycling™ detects the sensor signal, a message will be displayed on the

smartphone.

Tap [Pair to Device]. The verified sensor (CATEYE CDC-30) is displayed under [Device] and

pairing is completed.

* When pairing a sensor with the Cateye Cycling™ app an “A” is displayed after the sensor

name (CDC).

• When using the smart computer in Sensor Direct Mode:

Connect the smart computer to Cateye Cycling™, and then transmit the paired sensor

information.

STRADA SMART/PADRONE SMART: Connecting smart computer and smartphone

PADRONE SMART+: Connecting smart computer and smartphone

• When using AVVENTURA/PADRONE SMART+:

Cadence will not be displayed on the measurement screen in default configuration.

Customize the measurement screen to display cadence measurements.

AVVEBTURA: Changing the measurement screen

PADRONE SMART+: Changing the measurement screen

Important

When using ANT+ to perform pairing or pairing with a commercial computer

Refer to the instruction manual for your computer.