Instructions / Assembly

ManualsBrandsCatskill Craftsmen ManualsKitchen AppliancePromo Birch Cuisine Cart 21 in. Kitchen Island

CRAFTSMEN, INC.

Assembly Instructions

Model 1529

Cuisine Cart Deluxe

GENERAL:

1. You have purchased model 1529. Overall dimensions of an assembled unit is 21” x 15 1/4” x 34”

2. Should you need assistance or need to replace a damaged or missing part, DO NOT RETURN THE

UNIT TO THE STORE where you purchased it, simply give us a call at 607-652-7321 from 7:30 - 4:00 PM

Eastern time and we’ll send you the prepaid part via UPS usually that same day! Please have model

number and part description ready when you call.

3. Read the assembly instructions and the enclosed brochure before beginning assembly.

Assembly is very easy if you read and follow the instructions step by step.

4. Tools required: Phillips screwdrivers, medium and small; medium flat blade screwdriver and hammer.

Summary of content (14 pages)

PAGE 1
C R A F T S M E N, I N C. Assembly Instructions Model 1529 Cuisine Cart Deluxe GENERAL: 1. You have purchased model 1529. Overall dimensions of an assembled unit is 21” x 15 1/4” x 34” 2.
PAGE 2
CABINET PARTS TOP TOP P1 P2 Side Panel (2) Back Panel (1) T1 Cabinet Top(1) T2 Table Top Stick (2) D1 Drawer Front (1) D6 Drawer Dowel (1) D2 Drawer Back (1) D3 Drawer Side Right (1) D7 Door Spacer (1) D8 D9 B2 Bottom Brace (1) Left Door (1) Right Door (1) D4 Drawer Side Left (1) B1 Middle Brace (1) Middle Shelf has edge banding BS Bottom Shelf (1) MS Middle Shelf (1) D5 Drawer Bottom (1)
PAGE 3
CABINET HARDWARE 1 3/4” Phillips Flat Head Machine Screw (8) 3/16” Flat Washer (2) Cam (2) 1 1/4” Phillips Flat Head #8 Screw (12) 10-24 Hex Nut (8) 5/8” Phillips Flat Head #8 Screw (3) 1/2” Truss Head Machine Screw (2) 5/8 Wooden Disk (8) Cam Posts (2) 1 1/4” Truss Head Machine Screw (2) 1 1/2” Long 3/16” DIA. Steel Pin (4) Cup Handle (1) 1” Long 3/16” DIA. Steel Pin (8) 3/4” Long 3/16” DIA.
PAGE 4
STEP 1 1 1/4” #8 Screw 1” Steel Pin T2 P1 Repeat to other Side Panel T2 P1 STEP 2 P1 P1 P2 Nut 1 3/4” Machine Screw
PAGE 5
STEP 3 P2 P1 P1 1 1/4” Screw T1
PAGE 6
STEP 4 D2 A. Attach the drawer back to the drawer sides with four 1 1/4” #8 screws. Make sure parts are aligned as in illustration 4A. B. Insert drawer bottom into the slots in the drawer sides, best side to inside of drawer. Slide down until seated in the slot in the drawer back. See illustration4B. C. Screw the cam posts into the two outside holes on the inside face of the drawer front until seated. Only 3/8” of this post goes into the wood, leaving the 4 guide rings/head exposed. See illustration 4C.
PAGE 7
STEP 5 D6 D1 Place drawer in position STEP 6 1 1/2” Pin 5/8” #8 Screw 1/2” #4 Screw Magnet Plate 1 1/4” Machine Screw D7 D9 Door Knob Door assembly D8
PAGE 8
STEP 6 B2 B1 Install 3/4” pins in brace ends 3/4” Pin STEP 7 Nut B1 1 3/4” Machine Screw
PAGE 9
STEP 7 B2 Washer 1 3/4” Machine Screw D8 D9 B1
PAGE 10
STEP 8 B2 D9 D8 B1 A. Stick magnet to magnet plate on right door. B. With left door open, close the right door. The magnet should be positioned over the wooden block on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right door. The magnet will be in the correct position on the block. C. Secure magnet with the two round head screws in the magnet packet. Center screws in the slots in the magnet . This will allow adjustment later, if needed.
PAGE 11
STEP 9 MS BS
PAGE 12
STEP 10
PAGE 13
STEP 11 5/8” Wooden disk Tap in the 5/8” wooden disks. If you are afraid of marring the disks, you can cover them with a piece of paper.
PAGE 14
013013 For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. If you would like to purchase Butcher Block Oil directly from Catskill Craftsmen’s factory, we offer a reduced price. For one eight ounce (8 fl. oz.) bottle, which is sufficient for two applications, simply send $6.95 along with the completed coupon to the address below or visit us online at www.catskillcraftsmen.com for other ordering options. C R A F T S M E N, I N C.